We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions 4GB DDR3 1333MHz CL7 SODIMM for HP 2000-210Us 2000-300Ca 2000-320Ca memory upgrade

SKU CH-JSWQ-JHTW1

A 4 GB DDR3 SODIMM running at 1333 MHz with CL7 latency for HP 2000-series notebooks

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • Guaranteed compatibility with HP 2000 notebooks per manufacturer testing
  • 4 GB DDR3 1333 MHz CL7 boosts multitasking responsiveness
  • 5 V unbuffered SODIMM installs without configuration changes
  • 2Rx8 rank organisation supports full 4 GB capacity
  • Major-brand chipset ensures reliable long-term operation

HP 2000 Series Notebook Memory Upgrade

This 4 GB DDR3 SODIMM module is built for HP and Compaq 2000-series notebooks including the 2000-210Us, 2000-300Ca and 2000-320Ca. It adds 4 GB of system memory in a single 204-pin stick, suited to owners who want a straightforward capacity increase on these specific models.

Replaces Slower DDR3 Modules

The stick runs at 1333 MHz (PC3-10600) with CL7 7-7-7 timings at 1.5 V, upgrading from slower 1066 MHz (PC3-8500) modules that may ship in these laptops. The jump is worth it when the notebook’s memory bus can operate at the full 1333 MHz rate, which depends on the installed processor and chipset.

Simple SODIMM Installation

Insert the unbuffered non-ECC module into an empty 204-pin slot; no heat spreader is fitted, so clearance is standard. The system has two sockets and a 4 GB maximum on 32-bit operating systems, while 64-bit Windows is required to address the full 8 GB ceiling. Buyers who want more storage or a second graphics card will not be served by this memory-only upgrade.

Highlights

  • Guaranteed compatibility with HP 2000 notebooks per manufacturer testing
  • 4 GB DDR3 1333 MHz CL7 boosts multitasking responsiveness
  • 5 V unbuffered SODIMM installs without configuration changes
  • 2Rx8 rank organisation supports full 4 GB capacity
  • Major-brand chipset ensures reliable long-term operation

Specifications

BrandComputer Memory Solutions
ModelCM5126410600SODRH
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq 2000-210Us, 2000-300Ca, 2000-320Ca Notebook
Package Content1 Memory RAM Stick

Questions about this item

Will this 204-pin DDR3 SODIMM fit the memory slot in my HP 2000-210Us notebook?

Yes, the module is a 204-pin DDR3 SO-DIMM built to the mechanical and electrical spec used by the HP 2000-210Us, 2000-300Ca and 2000-320Ca notebooks.

What is the correct way to seat the module so the notebook recognises the full 4 GB?

Insert the stick at roughly 30 degrees until the gold contacts disappear, then press down firmly until both side clips click; the system may still show 3.5 GB if a 32-bit OS is installed.

Does this unbuffered non-ECC stick need any firmware update or periodic re-seating over time?

No firmware is required and the module is designed to stay seated for the life of the notebook; only remove it if you upgrade to a second 4 GB stick for 8 GB total on a 64-bit OS.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

More in System Specific Memory

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.