We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 memory sticks, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions 32GB (2x16GB) DDR4 2400 CL17 for ASRock Fatal1ty AB350 X370 memory upgrade

SKU CH-A31R-52FNQ

32 GB dual-channel DDR4 kit (2 × 16 GB, 2400 MHz, CL17) validated for ASRock Fatal1ty AB350 and X370 motherboards

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • 32GB dual-channel kit doubles memory bandwidth for ASRock Fatal1ty boards
  • CL17 timing at 2400MHz delivers responsive DDR4 performance
  • 2V unbuffered DIMMs run cool without a heat spreader
  • Two 16GB 2Rx8 modules fill half the four DIMM slots
  • Lifetime repair or exchange warranty from Computer Memory Solutions

32 GB DDR4 kit for ASRock Fatal1ty boards

This 32 GB kit contains two 16 GB DDR4 modules rated at 2400 MHz with CL17 timings. It is built for ASRock Fatal1ty AB350 and X370 motherboards including the Gaming K4, Gaming X and Professional Gaming models. The unbuffered non‑ECC DIMMs run at 1.2 V and use major brand chips.

Upgrade from lower capacity or slower DDR4

The kit replaces smaller or slower DDR4 modules to reach the board’s 64 GB maximum across four slots. The jump is worth it when applications need more than 16 GB total or when dual‑channel bandwidth at 2400 MHz improves throughput. Buyers who need more than 64 GB or registered ECC memory cannot use this kit.

Limits of the DDR4 2400 standard on these boards

The memory operates at the DDR4 2400 (PC4 19200) data rate with 17‑17‑17 latency. Four slots cap total capacity at 64 GB, so this 32 GB kit leaves two slots free for future expansion. Systems that require speeds above 2400 MHz or quad‑channel architecture will not benefit from this specification.

Highlights

  • 32GB dual-channel kit doubles memory bandwidth for ASRock Fatal1ty boards
  • CL17 timing at 2400MHz delivers responsive DDR4 performance
  • 2V unbuffered DIMMs run cool without a heat spreader
  • Two 16GB 2Rx8 modules fill half the four DIMM slots
  • Lifetime repair or exchange warranty from Computer Memory Solutions

Specifications

BrandComputer Memory Solutions
ModelCM2048642400DIMM
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemASRock Fatal1ty AB350 Gaming K4, Fatal1ty X370 Gaming K4, Fatal1ty X370 Gaming X, Fatal1ty X370 Professional Gaming Motherboards
Package Content2 Memory RAM Sticks

Questions about this item

Will the 288-pin DDR4 modules fit the four DIMM slots on my ASRock Fatal1ty AB350 or X370 board?

Yes — each stick is a standard 288-pin DDR4 DIMM, and the supported boards provide four DDR4 slots that accept this form factor.

Which slots should I populate first when installing the 2x16 GB kit, and what is the common mistake?

Install the two modules in the same-coloured slots (usually slots 2 and 4) to run dual-channel; the frequent error is placing them in adjacent slots 1 and 2, which forces single-channel mode.

If I later want the maximum 64 GB, what do I add and what should I match?

Add another 2x16 GB DDR4 2400 CL17 1.2 V unbuffered kit to fill the remaining two slots; matching speed, latency and voltage avoids timing conflicts.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

More in System Specific Memory

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.