We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connector

Computer Memory Solutions

Computer Memory Solutions 2GB DDR2 667 SO-DIMM for Gateway P-6831Fx P-6832 P-6836 P-6860Fx memory upgrade

SKU CH-8ZW6-3HBJG

2GB DDR2 667MHz SO-DIMM upgrades Gateway P-6831Fx, P-6832, P-6836 and P-6860Fx notebooks

  • Capacity2GB
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5
  • Voltage1.8V
  • Adds 2 GB of DDR2 667 MHz memory
  • CL5 latency keeps timing tight
  • Unbuffered 2Rx8 design suits notebook slots
  • 8 V operation matches original spec
  • Compatible with Gateway P-6831Fx, P-6832, P-6836, P-6860Fx

Gateway notebook memory upgrade

This 2GB DDR2 SO-DIMM is built for Gateway P-6831Fx, P-6832, P-6836 and P-6860Fx notebooks. It installs directly into the 200-pin memory slots of those models. The module runs at 667MHz with CL5 timing and operates at 1.8V. It is a genuine Computer Memory Solutions part with a lifetime warranty from the manufacturer.

Suitable for single-slot expansion

Owners of the listed Gateway notebooks who need a 2GB module to fill one of the two available sockets will find this kit matches the required specification. Systems that already contain two modules, or notebooks outside the supported model list, cannot use this stick. Buyers needing ECC or registered memory should look elsewhere because this module is unbuffered and non-ECC.

2GB capacity with 4GB system ceiling

The module provides 2GB of DDR2 5300 memory and the platform supports a maximum of 4GB across two sockets. Adding this stick to an empty slot raises total memory to 2GB or 4GB depending on the existing configuration. Once both sockets are populated the system reaches its limit and no further expansion is possible.

Highlights

  • Adds 2 GB of DDR2 667 MHz memory
  • CL5 latency keeps timing tight
  • Unbuffered 2Rx8 design suits notebook slots
  • 8 V operation matches original spec
  • Compatible with Gateway P-6831Fx, P-6832, P-6836, P-6860Fx

Specifications

BrandComputer Memory Solutions
ModelCM256645300SO
Capacity2GB
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemGateway Notebook P-6831Fx, P-6832, P-6836, P-6860Fx
Package Content1 Memory RAM Stick

Questions about this item

Does the Gateway notebook need an empty 200-pin DDR2 SO-DIMM slot to install this 2GB module?

Yes, the compatible Gateway models P-6831Fx, P-6832, P-6836 and P-6860Fx each have two DDR2 SO-DIMM sockets, so one must be free for this stick.

Will this CL5 667 MHz stick run with an existing CL5 667 MHz module?

Both modules share the same DDR2 667 speed and CL5 timing, so the system will operate them together at those settings.

How can I verify the new memory is recognised at 667 MHz after installation?

Boot the Gateway notebook and check the BIOS memory information or Windows Task Manager; both should show the installed capacity running at 667 MHz.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

More in System Specific Memory

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.