We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 memory sticks with black chips no heat spreaders

Computer Memory Solutions

Computer Memory Solutions 16GB (2x8GB) DDR3 1600MHz Dell Optiplex 7010 Ultra Slim USFF memory upgrade

SKU CH-GVY8-1XC2P

16 GB dual-channel DDR3 kit at 1600 MHz with CL11 timing for Dell Optiplex 7010 Ultra Slim USFF

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 16 GB dual-channel kit keeps the OptiPlex 7010 USFF running smoothly
  • 1600 MHz DDR3 speed matches the system's native memory bus
  • CL11 11-11-11 timings deliver responsive everyday performance
  • 5 V standard voltage ensures stable operation without extra cooling
  • 240-pin non-ECC unbuffered DIMMs install directly into the four factory slots

Dell Optiplex 7010 USFF memory kit

This 16 GB kit uses two 8 GB DDR3 modules rated at 1600 MHz with CL11 timing and 1.5 V operation. It is built specifically for the Dell Optiplex 7010 Ultra Slim USFF form factor and carries a limited lifetime warranty from the manufacturer.

Upgrade from 4 GB or 8 GB configurations

The Optiplex 7010 USFF supports a maximum of 16 GB across four sockets, so this two-module kit fills half the slots and reaches the platform limit in a single step. The jump is worth it when the system runs memory-intensive business applications or multitasks heavily on the original smaller capacity.

Verify USFF chassis and vacant DIMM slots

Confirm the unit is the Ultra Slim USFF version because other 7010 chassis use different memory layouts. Check that at least two 240-pin DDR3 sockets are free and that the existing modules, if any, are also non-ECC unbuffered DDR3 1600 to avoid mixing incompatible types.

Highlights

  • 16 GB dual-channel kit keeps the OptiPlex 7010 USFF running smoothly
  • 1600 MHz DDR3 speed matches the system's native memory bus
  • CL11 11-11-11 timings deliver responsive everyday performance
  • 5 V standard voltage ensures stable operation without extra cooling
  • 240-pin non-ECC unbuffered DIMMs install directly into the four factory slots

Specifications

BrandComputer Memory Solutions
ModelCM10246412800DIMM
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Optiplex 7010 Ultra Slim (USFF)
Package Content2 Memory RAM Sticks

Questions about this item

Will the 240-pin DDR3 DIMMs fit inside the Dell Optiplex 7010 Ultra Slim chassis?

Yes, the 240-pin DDR3 DIMMs are the correct form factor for the Optiplex 7010 Ultra Slim and will seat in the motherboard slots.

What is the correct installation sequence for the two 8 GB modules?

Insert each module at a slight angle into the slot, then press down firmly until the side clips click into the notches on both ends of the 240-pin DIMM.

When should I consider replacing these CL11 1.5 V DDR3 modules?

Replace them only if memory diagnostics report errors or if the system becomes unstable; otherwise the modules have no scheduled service interval.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

More in System Specific Memory

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.