Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR3 1333MHz CL9 SODIMM HP Envy 20-d013w/d030/d034 memory upgrade
16 GB dual-channel DDR3 SODIMM kit validated for HP Envy 20-d013w, 20-d030 and 20-d034 desktops
- Capacity16GB (2 x 8GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 16 GB dual-channel kit boosts multitasking headroom
- 1333 MHz DDR3 speed matches factory spec
- CL9 9-9-9 timing keeps latency low
- 204-pin SODIMM form factor fits Envy TouchSmart slots
- 5 V unbuffered non-ECC design ensures drop-in compatibility
Targeted DDR3 upgrade
This 16 GB kit contains two 8 GB DDR3 SODIMM modules rated at 1333 MHz with CL9 timing. It is built specifically for HP Envy Desktop TouchSmart models 20-d013w, 20-d030 and 20-d034. The unbuffered, non-ECC design matches the original specification for these all-in-one systems.
Verify your current memory
Confirm your Envy TouchSmart uses 204-pin DDR3 SO-DIMM slots and supports 1.5 V modules. The system has two sockets and the supplier notes maximum capacity depends on the installed processor and operating system architecture. Remove existing sticks before installing this matched pair for best stability.
Simple two-slot installation
Insert both modules into the two available sockets to reach the full 16 GB capacity. No heat spreader is fitted, so clearance inside the compact chassis is not an issue. The kit frees the system from the 4 GB limit of a 32-bit OS when a 64-bit environment and compatible quad-core processor are present.
Highlights
- 16 GB dual-channel kit boosts multitasking headroom
- 1333 MHz DDR3 speed matches factory spec
- CL9 9-9-9 timing keeps latency low
- 204-pin SODIMM form factor fits Envy TouchSmart slots
- 5 V unbuffered non-ECC design ensures drop-in compatibility
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246410600SODRH |
| Capacity | 16GB (2 x 8GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Hp Envy Desktop Touchsmart 20-D013W, 20-D030, 20-D034 |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
Does the kit contain two 8 GB DDR3 SODIMM modules or do I need to buy a second stick separately?
The package includes two 8 GB 204-pin DDR3 1333 MHz CL9 SODIMM modules for a total of 16 GB.
Should I choose the 16 GB kit or a smaller capacity for the HP Envy 20-d013w?
The 16 GB kit matches the maximum supported memory for Core i7 quad-core models of the Envy 20-d013w, 20-d030 and 20-d034.
Will the PC3-10600 1333 MHz rating run at that speed once installed in the Envy 20-d034?
The modules operate at DDR3 1333 MHz (PC3-10600) with CL9 timing at 1.5 V when installed in the compatible Envy TouchSmart desktops.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



