We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black commountain speaker mic with coiled cable, dual 2.5mm and 3.5mm Kenwood pins, push-to-talk button and 360-degree rotating clip

commountain Speaker Mic 2-Pin Kenwood 2.5mm 3.5mm Black

SKU CH-6X7Y-A15H7

Speaker microphone with Kenwood 2.5mm and 3.5mm two-pin connector, 93 dB sensitivity and 58 dB signal-to-noise ratio for clear transmission

  • ColorBlack
  • ConnectorKenwood 2.5mm and 3.5mm two pin connector
  • Microphone Sensitivity93 decibels
  • Microphone Impedance8 ohm
  • Microphone Signal to Noise Ratio(SNR)58 decibels
  • FeaturesClip
  • Clear audio in noisy settings with 93 dB sensitivity and 58 dB SNR
  • Kenwood 2.5 mm and 3.5 mm two-pin connector fits many radios
  • Rugged polycarbonate housing with vibration absorption withstands knocks
  • TPU cable reinforced with Kevlar fibre resists bending and abrasion
  • Stainless-steel 360° rotatable clip secures the mic during active use

Compatible Radios & Connector

This speaker microphone uses a Kenwood-style dual-pin connector with 2.5 mm and 3.5 mm plugs. It fits a wide range of Baofeng, Kenwood, Retevis, PXTON, Samcom, Anytone, TYT, PUXING and WOUXUN handhelds, including the UV-82HP, UV-5R series, GT-3TP and GM-30 models. Buyers whose radios use a different pin layout or a single audio jack cannot use this microphone.

Upgrade From Basic Hand Mic

The unit replaces a standard hand microphone with a rugged polycarbonate housing, an internal vibration absorption system and a Kevlar-reinforced TPU cable. The jump is worthwhile for users who need clearer transmission in noisy environments and a cable that resists repeated bending and pulling. It is not suited for operators who require an intrinsically safe or fully waterproof device for hazardous locations.

Check Before Ordering

Verify that your radio accepts the Kenwood two-pin audio jack shown in the compatibility image. Confirm that IP 54 splash resistance meets your environmental needs, because the microphone is not waterproof. Ensure the 8 ohm impedance and 93 decibel sensitivity match your radio's audio specifications for proper operation.

Highlights

  • Clear audio in noisy settings with 93 dB sensitivity and 58 dB SNR
  • Kenwood 2.5 mm and 3.5 mm two-pin connector fits many radios
  • Rugged polycarbonate housing with vibration absorption withstands knocks
  • TPU cable reinforced with Kevlar fibre resists bending and abrasion
  • Stainless-steel 360° rotatable clip secures the mic during active use

Specifications

Brandcommountain
Model8541724367
Part Number7545868323
ColorBlack
ConnectorKenwood 2.5mm and 3.5mm two pin connector
Microphone Sensitivity93 decibels
Microphone Impedance8 ohm
Microphone Signal to Noise Ratio(SNR)58 decibels
FeaturesClip

Questions about this item

What radios accept the Kenwood 2.5 mm and 3.5 mm two-pin connector on this mic?

It fits Baofeng, Kenwood, Retevis, PXTON, Samcom, Anytone, TYT, PUXING and WOUXUN models that use the same two-pin jack, including the UV-5R, UV-82, GT-5R and GM-30 series.

How do I attach the microphone and which step is often missed?

Plug both the 2.5 mm and 3.5 mm pins fully into the radio's accessory jack, then snap the 360-degree rotatable clip onto a strap or belt; the step users skip is seating the second pin completely.

Which part will need replacement first with daily use?

The TPU-jacketed cable with Kevlar reinforcement is rated for high tensile and bending cycles, so the 8-ohm speaker or 93 dB microphone element will typically wear out before the cable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.