We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular panel thermometer with waterproof probe and long cable

Commercial Digital Panel Mount Thermometer -40 to 300°F Waterproof Probe 10 ft

SKU CH-FEDE-J3AJQ

Panel-mount digital thermometer reads -40 to 300 °F with ±1.8 °F accuracy from 14 to 212 °F, waterproof probe on 10 ft cable

  • ColorWhite
  • Monitor from -40 to 300°F for lab and factory processes
  • Document readings with ±1.8°F accuracy between 14 and 212°F
  • Place probe in tanks or lines using 10 ft waterproof cable
  • React quickly with 10-second update rate
  • Power from included AAA battery for simple maintenance

Panel-Mount Thermometer for Lab and Factory Use

The Commercial Digital Panel Mount Thermometer measures temperature from -40 to 300°F (-40 to 150°C) with a waterproof probe on a 10 ft cable. It is built for laboratories, factories and temperature-sensitive storage where reliable monitoring matters. Operators get a clear readout at the panel while the probe sits in tanks, lines or chambers. Buyers who need wireless logging or multi-point recording will not find those features here.

Thermals, Noise and Power Draw

The unit runs on one included AAA alkaline battery with a 10-second update rate, so there is no mains wiring, no fan and no audible noise. Power draw is minimal and the probe withstands immersion in liquids across the full range. Accuracy is rated ±1.8°F from 14 to 212°F and ±3.6°F outside that band, giving documented performance for process control. Installations needing continuous powered backlighting or alarm outputs are not supported.

Included Probe, Cable and Battery

The box contains the panel-mount display, a waterproof immersible air/liquid probe with a 10 ft lead, and one AAA battery so the thermometer works immediately. The long cable allows flexible placement through enclosure walls or into deep vessels without extension wiring. The 1-year limited warranty covers the supplied hardware. Users who require replaceable probe tips, calibration certificates or software integration must source those separately.

Highlights

  • Monitor from -40 to 300°F for lab and factory processes
  • Document readings with ±1.8°F accuracy between 14 and 212°F
  • Place probe in tanks or lines using 10 ft waterproof cable
  • React quickly with 10-second update rate
  • Power from included AAA battery for simple maintenance

Specifications

ColorWhite

Questions about this item

How do I mount the panel thermometer and route the 10 ft probe cable into a tank?

Cut a panel opening to match the unit's bezel, snap the thermometer in from the front, then feed the waterproof probe through the 10-foot cable into the liquid or air stream you are monitoring.

What maintenance will the thermometer need after installation?

Replace the included AAA alkaline battery when the display dims or readings lag; the waterproof probe itself requires no periodic service.

At what point does accuracy widen beyond ±1.8°F during sustained high-temperature use?

Once the measured temperature exceeds 212°F the rated tolerance expands to ±3.6°F, and it stays at that wider band up to the 300°F limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.