We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel TV wall mount with single extendable arm, articulated joints, VESA plate visible, fine texture finish

CMPLE

CMPLE 1039-N Full Motion TV Mount 32-55" 99lbs

SKU CH-9M2E-7EB0E

Full-motion steel bracket holds 32–55 in flat or curved TVs up to 99 lbs, extends 510 mm and swivels 180° for corner-to-corner viewing

  • Full motion extends 510 mm for flexible viewing angles
  • Swivels 180° left and right to suit any seat
  • Tilt adjusts 0°-10° to reduce screen glare
  • Supports 32-55 inch TVs up to 99 lbs
  • Fits VESA patterns 200x200 through 400x400

Heavy-Duty Full-Motion TV Wall Mount

The CMPLE 1039-N is a heavy-duty full-motion wall mount designed for flat and curved televisions from 32 to 55 inches. It supports a weight capacity of 99 lbs and accommodates VESA patterns up to 400x400 mm. The single extendable arm allows the screen to pull out to 510 mm from the wall and retract to a 95 mm profile. This mount suits living rooms or bedrooms where flexible viewing angles are required.

Manual Level Adjustment and Range

Built-in level adjustment provides 5 degrees of clockwise and counterclockwise rotation to ensure the display sits perfectly level after installation. The mount offers a tilt range of 0 to 10 degrees and a full 180-degree swivel range, enabling up to 90 degrees of rotation left or right from centre. These mechanical movements operate without motors or electronic components, relying on steel construction for durability. The fine texture black finish resists glare and blends with most décors.

Single Stud Arm and Hardware Kit

The 40x20x2 mm steel arm mounts to a single wall stud or solid masonry using the included hardware kit, leaving the area behind the display free for cable routing when retracted. An instruction manual is supplied to guide the installation process. The mount is not suitable for screens larger than 55 inches or heavier than 99 lbs, nor for VESA patterns exceeding 400x400 mm. Installers needing dual-arm articulation or motorised movement should consider alternative mounting styles.

Highlights

  • Full motion extends 510 mm for flexible viewing angles
  • Swivels 180° left and right to suit any seat
  • Tilt adjusts 0°-10° to reduce screen glare
  • Supports 32-55 inch TVs up to 99 lbs
  • Fits VESA patterns 200x200 through 400x400

Specifications

BrandCmple.com

Questions about this item

How do I mount the 1039-N bracket to the wall and what step is often missed?

Secure the wall plate to studs using the supplied lag bolts, then hang the arm assembly onto the plate; the step often missed is using the built-in level to dial in up to 5° of clockwise or counter-clockwise adjustment before tightening the final screws.

Which moving parts of the 1039-N may need attention after extended use?

The single extendable arm pivots on a swivel joint rated for 180° rotation and a tilt mechanism covering 0° to 10°; periodic checks that the pivot bolts remain snug and that the arm slides smoothly along the 40x20x2 mm steel tube are the only routine maintenance required.

At what point does the 1039-N reach its physical limit during daily adjustments?

The mount extends 510 mm from the wall and retracts to a 95 mm profile, supports displays up to 99 lbs, and allows 90° of swivel to each side; the first limit encountered in normal use is either the 99 lb weight ceiling or the 510 mm maximum extension.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.