Clover
Clover Silicon Carbide Gel Water Mix Gray 600 Grit 233179
Silicon carbide abrasive gel mixed with water for 600 grit sanding and grinding tasks
- TypeSanders & Grinders Accessories
- Color/FinishGray
- 600-grit silicon carbide gel cuts fast for smooth finishing
- Gray water-mix formula rinses clean and reduces airborne dust
- 1 lb container supplies enough compound for multiple jobs
- Prop 65 warning alerts users to regulated chemical content
- Model 233179 identifies the exact Clover accessory for reordering
Silicon Carbide Gel for Sanders & Grinders
This gray silicon carbide gel is formulated for use with power sanders and grinders. It mixes with water to create a 600 grit abrasive compound suitable for surface preparation tasks. The product is sold new as a power tool accessory.
Thermal behaviour and power consumption
No thermal data, noise ratings or power draw figures are supplied for this consumable gel. It does not generate heat or noise on its own and draws no electrical power during application.
Proposition 65 warning and usage impact
The product carries a California Proposition 65 warning for a chemical known to cause cancer and birth defects or other reproductive harm. Safe handling practices and personal protective equipment are required when mixing and applying the gel. Buyers who need a non-regulated abrasive compound cannot use this product.
Highlights
- 600-grit silicon carbide gel cuts fast for smooth finishing
- Gray water-mix formula rinses clean and reduces airborne dust
- 1 lb container supplies enough compound for multiple jobs
- Prop 65 warning alerts users to regulated chemical content
- Model 233179 identifies the exact Clover accessory for reordering
Specifications
| Brand | Clover |
|---|---|
| Type | Sanders & Grinders Accessories |
| Color/Finish | Gray |
Questions about this item
How do I mix the 600 grit silicon carbide gel with water and what ratio mistake should I avoid?
Add water slowly while stirring until the gel reaches a smooth paste consistency; the common error is pouring too much water at once, which makes the mixture runny and reduces cutting action.
When will the 600 grit abrasive particles wear down enough to need replacement?
Replace the mixture when the gray colour fades and the surface feels smooth instead of gritty, indicating the silicon carbide grains have broken down and no longer cut effectively.
At what point does heat buildup limit continuous use of this water-mix compound?
Prolonged high-pressure grinding generates heat that can boil off the water content, turning the paste dry and causing it to glaze over; pause to re-wet the surface when the mix stops flowing freely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
