Cleveland Golf
Cleveland Golf End Mill HSS TiCN 1/2 2FL SGL Sq End CC
A TiCN-coated high-speed steel square end mill with two flutes and a 30-degree helix for finishing cuts
- TypeHole, Drill, Bore & Wire Gauges
- TiCN coating extends tool life during finishing
- 2-flute design improves chip evacuation in slots
- 30-degree helix reduces vibration for smoother cuts
- Square end with zero corner radius creates sharp profiles
- 1/2-inch shank matches standard collets directly
Square End Mill for Finishing
This Cleveland Golf end mill is a single-end square cutter made from high-speed steel with a TiCN coating. It is designed for general-purpose finishing operations in a milling machine. The tool suits machinists and maintenance technicians who need a reliable cutter for producing flat-bottomed slots, pockets and profiles. Its right-hand cutting direction matches standard milling spindle rotation.
Check Shank and Holder Compatibility
Verify that your tool holder or collet accepts a 1/2 inch diameter shank before ordering. Ensure the machine spindle can accommodate the 3-1/4 inch overall length without interference. Confirm the workpiece material and cutting parameters are appropriate for a two-flute high-speed steel tool with a 30-degree helix angle. The zero corner radius leaves a sharp internal corner in the cut.
Fits Standard Milling Setups
The 1/2 inch cutting diameter and 1 inch length of cut suit a range of pocketing and profiling tasks in general-purpose work. The TiCN finish helps extend tool life and allows higher speeds than uncoated high-speed steel. This cutter frees the operator from needing a separate roughing tool when a smooth finish is the primary goal. It requires a rigid setup to prevent chatter on the two flutes.
Highlights
- TiCN coating extends tool life during finishing
- 2-flute design improves chip evacuation in slots
- 30-degree helix reduces vibration for smoother cuts
- Square end with zero corner radius creates sharp profiles
- 1/2-inch shank matches standard collets directly
Specifications
| Brand | Cleveland |
|---|---|
| Type | Hole, Drill, Bore & Wire Gauges |
Questions about this item
What is included in the box and is any additional tooling required?
The box contains a single Cleveland Golf HSS TiCN square end mill, 1/2 inch diameter with 2 flutes and 1 inch length of cut. A compatible 1/2 inch tool holder must be purchased separately.
How do I decide between the available configurations for this end mill?
This listing offers one specification: 1/2 inch shank, 2 flutes, TiCN finish, 30 degree helix and 3-1/4 inch overall length. Choose it when those exact parameters match your milling operation.
What does the 30 degree helix angle mean for chip evacuation in my machine?
The 30 degree helix provides standard chip clearance for general-purpose finishing in steel and non-ferrous metals, balancing cutting smoothness with adequate chip removal at typical feed rates.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
