Cleveland
Cleveland C81053 2-Flute Carbide Square End Mill .5 in pneumatic accessory
Carbide square end mill with .5 in diameter, 1 in length of cut and 3 in overall length for general milling
- TypeMilling
- 2-flute carbide end mill cuts cleanly in general-purpose milling
- .5 in diameter suits common shank sizes
- 1 in length of cut handles deep pockets
- 3 in overall length fits standard holders
- TiAlN coating extends tool life in heat
Cleveland C81053 Carbide End Mill
The Cleveland C81053 is a solid carbide square end mill with a .5 inch milling diameter. It features two flutes and a TiAlN coating for general-purpose milling applications. The tool has a straight shank measuring 1/2 inch with an overall length of 3 inches. This new accessory is designed for use with compatible milling machines.
Suited for general-purpose milling tasks
This end mill suits machinists performing slotting or profiling operations in a range of materials. The two-flute design aids chip evacuation during standard milling work. Buyers needing coolant-through capability or a different flute count for specific high-performance alloys should look at other tooling options. The non-coolant-through design limits use in setups requiring internal coolant delivery.
Verify shank compatibility and machine clearance
Check that your tool holder or collet accepts a 1/2 inch straight shank before ordering. Confirm the 3 inch overall length and 1 inch length of cut fit within your machine's work envelope and clearance zones. Ensure your milling machine provides adequate rigidity for a .5 inch diameter carbide cutter. The TiAlN coating performs best with appropriate speeds and feeds for the workpiece material.
Highlights
- 2-flute carbide end mill cuts cleanly in general-purpose milling
- .5 in diameter suits common shank sizes
- 1 in length of cut handles deep pockets
- 3 in overall length fits standard holders
- TiAlN coating extends tool life in heat
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
What collet or tool holder size do I need for the 1/2 in shank?
A 1/2 in collet or end-mill holder matching your spindle taper will secure the .5 in shank without an adapter.
Can this carbide end mill run at the lower spindle speeds of an older manual mill?
Carbide prefers higher surface speeds, but at reduced feed per tooth it will cut on a slower manual machine without chipping.
How do I confirm the TiAlN coating is intact after the first cuts?
The flute faces should show a uniform violet-grey sheen with no bare carbide spots after breaking in.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
