Cleveland
Cleveland C81034 2-Flute Carbide Square Single End GP End Mill
Carbide square end mill with TiAlN coating, 0.3125 inch diameter and 0.5 inch cut length for general-purpose milling
- TypeMilling
- Carbide construction resists wear for longer tool life
- TiAlN coating reduces friction and extends cutting performance
- 2-flute design clears chips efficiently in slotting and profiling
- 3125 in diameter suits precise milling operations
- 5 in length of cut handles shallow pocketing tasks
Cleveland C81034 Square End Mill
The Cleveland C81034 is a 2-flute carbide square end mill built for general-purpose milling tasks. Its 0.3125 inch cutting diameter and 5/16 inch shank fit standard tool holders used in CNC and manual machining setups. The TiAlN coating adds wear resistance when cutting steels and alloys. This tool suits machinists and fabricators who need a reliable single-end cutter for slotting and profiling.
TiAlN coated carbide handles heat well
Carbide construction with a TiAlN finish resists the heat generated during continuous milling passes. The non-coolant-through design relies on external flood or mist cooling to manage temperatures at the cutting zone. Two flutes provide efficient chip evacuation in softer materials, reducing the chance of built-up edge. Power draw on the spindle stays consistent thanks to the square-end geometry and 0.5 inch length of cut.
Solid carbide body with straight shank
The solid carbide body delivers rigidity that minimises deflection during side-loading operations. A straight 5/16 inch shank ensures secure clamping in ER collets or Weldon flats without extra adapters. Overall length of 2 inches keeps the tool compact for machines with limited Z clearance. The absence of a neck diameter means full shank support right up to the flutes, which helps in shallow pocketing work.
Highlights
- Carbide construction resists wear for longer tool life
- TiAlN coating reduces friction and extends cutting performance
- 2-flute design clears chips efficiently in slotting and profiling
- 3125 in diameter suits precise milling operations
- 5 in length of cut handles shallow pocketing tasks
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
How is the 5/16 in shank end mill installed and what step is often missed?
Secure the .3125 in shank fully into a matching collet or holder, then verify run-out before cutting; the step most often missed is not seating the shank deep enough, which causes vibration and premature wear.
What maintenance or replacement will this carbide end mill need later?
The TiAlN coated carbide flutes will dull with use; plan to resharpen or replace the tool once edge wear reduces cut quality or increases cutting forces beyond acceptable limits.
What limit appears first during sustained milling with this 2-flute tool?
Heat buildup at the cutting edges typically limits continuous use before chip evacuation becomes an issue, especially in deeper slots where the .5 in length of cut engages fully.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
