Cleveland
Cleveland C81010 2-Flute Carbide Square End Mill .125 in .5 in LOC
Two-flute carbide square end mill with 0.125 in diameter and 0.5 in length of cut for general-purpose milling
- TypeMilling
- Two-flute design enables efficient chip evacuation in slots
- Carbide construction resists wear during high-speed milling
- TiAlN coating reduces friction and extends tool life
- .125 in diameter suits precision profiling work
- .5 in length of cut allows deeper passes per operation
Cleveland C81010 2-Flute Carbide End Mill
The Cleveland C81010 is a 2-flute carbide square end mill with a 0.125 in milling diameter and 0.5 in length of cut. It features a TiAlN coating and a straight shank measuring 1/8 in diameter. The overall length is 1 1/2 in, designed for general-purpose milling applications.
Who this suits and who should look elsewhere
This tool suits machinists performing general-purpose milling operations requiring a small-diameter carbide cutter with TiAlN coating. Buyers needing coolant-through capability or a longer length of cut should consider other options. Those requiring a different flute count or shank diameter will need an alternative tool.
Deciding specification: 0.125 in milling diameter
The 0.125 in milling diameter is the critical specification that determines if this end mill fits the required feature size. It directly dictates the minimum slot width or profile radius achievable in the workpiece. Verify this diameter matches the design requirements before purchasing.
Highlights
- Two-flute design enables efficient chip evacuation in slots
- Carbide construction resists wear during high-speed milling
- TiAlN coating reduces friction and extends tool life
- .125 in diameter suits precision profiling work
- .5 in length of cut allows deeper passes per operation
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
How do I install the .125 in shank end mill, and what step is often missed?
Clamp the .125 in shank fully into a matching collet or holder, then verify run-out before cutting; the step often missed is skipping the run-out check, which causes premature wear on the carbide flutes.
What maintenance or replacement will the TiAlN coated carbide end mill need later?
The TiAlN coating wears gradually; plan to resharpen or replace the tool once the cutting edges show rounding or the coating disappears from the .5 in length of cut.
What limit appears first during sustained milling with this 2-flute carbide end mill?
Heat buildup in the non-coolant-through carbide body becomes the first limit, causing coating degradation and edge chipping before the .5 in flute length wears out.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
