Cleveland
Cleveland C80571 5-Flute Carbide Square End Mill .5 in
A 5-flute carbide square end mill with TiAlN coating for ferrous materials, featuring a 0.5 in cutting diameter and 2 in length of cut
- TypeMilling
- 5-flute carbide design delivers smoother finishes in ferrous materials
- TiAlN coating extends tool life during high-speed milling
- 5 in diameter with 2 in length of cut handles deep pocketing
- 1/2 in straight shank fits standard ER collets and end-mill holders
- 4 in overall length provides rigidity for heavy-duty profiling
Cleveland C80571 5-Flute End Mill
The Cleveland C80571 is a 5-flute carbide square end mill built for ferrous material milling. Its TiAlN coating supports wear resistance during high-speed operations. The tool features a .5 inch cutting diameter and a straight shank matching that diameter. It suits CNC and manual milling setups requiring a rigid, single-end cutter.
Verify Shank Fit and Coolant Setup
Confirm your tool holder accepts a straight 1/2 inch shank before ordering. The cutter is non-coolant-through, so external flood or mist coolant must reach the 2 inch length of cut. Overall length measures 4 inches, so check machine envelope and tool changer clearance. No neck relief is present, limiting deep-pocket reach.
For Ferrous Roughing and Finishing
This end mill serves shops cutting steel, stainless steel or cast iron where a 5-flute carbide tool reduces chatter. It is not for non-ferrous alloys, composites or wood where chip evacuation geometry differs. Buyers needing internal coolant channels, a necked shank for deep cavities or a different flute count should look elsewhere.
Highlights
- 5-flute carbide design delivers smoother finishes in ferrous materials
- TiAlN coating extends tool life during high-speed milling
- 5 in diameter with 2 in length of cut handles deep pocketing
- 1/2 in straight shank fits standard ER collets and end-mill holders
- 4 in overall length provides rigidity for heavy-duty profiling
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
What does the Cleveland C80571 end mill include and what must be purchased separately?
The box contains the single 5-flute carbide square end mill with TiAlN coating. Tool holders, collets, coolant systems and work-holding fixtures are sold separately.
How do I choose between the available versions or capacities of the Cleveland C80571?
The Cleveland C80571 is offered in one specification: 0.5 in milling diameter, 2 in length of cut, 4 in overall length and 1/2 in shank diameter. Select this model when those dimensions match your job.
What does the 0.5 in milling diameter mean once the cutter is in the machine?
A 0.5 in milling diameter produces a half-inch wide cut per pass, determining the slot width or profile radius you can achieve in ferrous materials.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
