Cleveland
Cleveland C80565 5-Flute Carbide HP Square Single End Mill
A 5-flute carbide square end mill with TiAlN coating for ferrous materials, featuring a .5 in milling diameter, 1.25 in length of cut and 3 in overall length
- TypeMilling
- 5-flute carbide design for efficient ferrous material cutting
- TiAlN coating extends tool life in high-speed milling
- .5 inch diameter suits precision machining tasks
- 25 inch length of cut enables deeper profiling passes
- 3 inch overall length provides rigid reach for stable operation
Cleveland C80565 5-Flute Carbide End Mill
The Cleveland C80565 is a 5-flute carbide square end mill designed for machining ferrous materials. Its TiAlN coating supports high-performance cutting in demanding applications. This tool suits machinists and fabricators requiring precise slotting or profiling in steel and iron alloys. The 0.5 inch milling diameter and straight shank fit standard holders.
Installing the .5 in shank end mill
Secure the 1/2 inch straight shank firmly in a compatible collet or end mill holder to prevent runout. Ensure the tool holder is clean and rated for the cutting forces generated by a 5-flute carbide geometry. A common issue is insufficient clamping pressure leading to tool pull-out or vibration during heavy cuts. Verify machine spindle rigidity matches the tool specifications.
Check setup before ordering C80565
Confirm your machine accepts a 1/2 inch shank diameter and provides adequate clearance for the 3 inch overall length. The 1.25 inch length of cut determines maximum depth per pass in a single operation. This tool is non-coolant through, so external flood or mist coolant delivery must reach the cutting zone effectively. Ensure workpiece material is ferrous as intended for this geometry.
Highlights
- 5-flute carbide design for efficient ferrous material cutting
- TiAlN coating extends tool life in high-speed milling
- .5 inch diameter suits precision machining tasks
- 25 inch length of cut enables deeper profiling passes
- 3 inch overall length provides rigid reach for stable operation
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
How can I confirm the 1.25 in length of cut is performing correctly after setup?
Measure the cut depth on a test piece of ferrous material; it should match the 1.25 in length of cut without chatter or excessive tool wear.
What comes in the package and do I need a separate tool holder?
The box contains the single 0.5 in diameter carbide end mill with TiAlN coating; a compatible 1/2 in shank tool holder or collet must be sourced separately.
When should I choose the C80565 over other flute counts or coatings?
Select this 5-flute TiAlN-coated carbide mill for high-performance finishing in ferrous materials where the 1.25 in cut length and 3 in overall length suit your setup.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
