Cleveland
Cleveland C80040 4-Flute Carbide HP VI Square Single End Mill
Four-flute carbide square end mill with .5 in diameter and .625 in cutting length for high-performance milling
- TypeMilling
- 5 in milling diameter handles standard slot widths
- 4-flute carbide construction delivers smooth finish in steel and alloy
- TiAlN coating extends tool life at higher cutting speeds
- 625 in length of cut reaches deeper features without deflection
- 1/2 in shank fits common ER and Weldon holders directly
Cleveland C80040 4-Flute Carbide End Mill
The Cleveland C80040 is a square end mill designed for general milling applications. Its four-flute carbide construction provides rigidity for profiling and slotting tasks. Machinists and maintenance technicians use this tool for precise material removal in metalworking shops. The TiAlN coating enhances wear resistance during dry cutting operations.
Practical limits of the straight shank interface
The straight shank with a .5 inch diameter fits standard ER collets and Weldon holders without adapters. A 2 1/2 inch overall length limits reach in deep cavities or long overhang setups. The .625 inch length of cut restricts axial depth per pass to maintain tool stability. Non-coolant-through design requires external flood or mist coolant for chip evacuation in sticky materials.
The .5 inch milling diameter decides fit
This cutter produces a .5 inch wide slot or profile in a single pass. Shops needing smaller radii or narrower channels must select a different diameter tool. The fixed geometry cannot be altered for stepped features or custom corner radii. Buyers who need more cutting length or a necked shank for clearance should choose another model.
Highlights
- 5 in milling diameter handles standard slot widths
- 4-flute carbide construction delivers smooth finish in steel and alloy
- TiAlN coating extends tool life at higher cutting speeds
- 625 in length of cut reaches deeper features without deflection
- 1/2 in shank fits common ER and Weldon holders directly
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
Which diameter and length of cut should I choose for my milling job?
This end mill has a 0.5 in milling diameter and a 0.625 in length of cut, suited for slots or profiles matching those dimensions.
What does the 0.5 in diameter mean when the tool is in the spindle?
It sets the cut width to half an inch per pass, determining the material removal rate and the minimum internal corner radius you can machine.
How does the straight shank interface limit use on different holders?
The 1/2 in straight shank fits standard collets and end mill holders, but cannot be used in coolant-through tooling because the tool is non-coolant through.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
