Cleveland
Cleveland C80027 4-Flute Carbide HP VI Square End Mill
A 4-flute carbide square end mill with TiAlN coating for high-performance milling applications
- TypeMilling
- 4-flute carbide design enables efficient material removal
- TiAlN coating extends tool life in high-heat cuts
- 375 in diameter suits precision milling tasks
- 625 in length of cut handles deeper passes
- 2 in overall length fits standard tool holders
Cleveland C80027 4-Flute Carbide End Mill
The Cleveland C80027 is a 4-flute carbide square end mill designed for general milling operations. It features a TiAlN coating for extended tool life and a straight shank for standard tool holders. This cutter suits machinists and maintenance teams requiring reliable material removal in ferrous alloys.
Milling Diameter 0.375 Inch Cutting Limits
The 0.375 inch milling diameter sets the minimum slot width and internal corner radius achievable in a single pass. Length of cut is 0.625 inch, limiting axial engagement depth per operation. Non-coolant-through design requires external flood or mist delivery for heat evacuation in deep cavities or high-speed profiling.
Shank Diameter 3/8 Inch Holder Compatibility
Verify your collet, end mill holder or shrink-fit chuck accepts a 3/8 inch straight shank before ordering. Overall length of 2 inches determines the maximum gauge length available inside the machine envelope. Confirm the tool clearance envelope suits your workpiece fixtures and spindle travel limits.
Highlights
- 4-flute carbide design enables efficient material removal
- TiAlN coating extends tool life in high-heat cuts
- 375 in diameter suits precision milling tasks
- 625 in length of cut handles deeper passes
- 2 in overall length fits standard tool holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
Should I choose the 0.375 in diameter end mill or a different size for my job?
Select the 0.375 in milling diameter when your design calls for a 3/8 in slot or profile; the 0.625 in length of cut and 2 in overall length suit standard pocket depths.
What does the 0.375 in milling diameter mean once the tool is in the spindle?
It produces a finished cut width of 3/8 in, and the TiAlN coating helps maintain that dimension in steel and stainless by reducing built-up edge and wear.
Does the straight 3/8 in shank fit a standard ER collet or Weldon holder?
Yes, the 3/8 in straight shank seats directly in a matching ER collet or Weldon flat holder without an adapter, giving full clamping contact.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
