We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cleveland C80007 4-flute carbide square end mill, TiAlN coated, 3/16 inch shank

Cleveland

Cleveland C80007 4-Flute Carbide HP VI Square End Mill

SKU CH-REG6-15VCY

C80007 four-flute carbide square end mill with TiAlN coating for milling

  • TypeMilling
  • 4-flute carbide design improves chip evacuation and tool life
  • TiAlN coating increases heat resistance for higher cutting speeds
  • 1875 in diameter suits precision milling tasks
  • 375 in length of cut enables deeper passes
  • 3/16 in shank fits standard tool holders

Purpose and user

The Cleveland C80007 is a 4-flute carbide square end mill built for general milling tasks. It suits machinists and fabricators who need a reliable tool for slotting and profiling in a range of materials.

Check your setup

Verify that your tool holder accepts a 3/16 in shank diameter and that the machine can accommodate a 2 in overall length. Confirm the spindle speed and feed rate suit a 0.1875 in milling diameter with a 0.375 in length of cut.

Coating benefit

The TiAlN coating increases surface hardness and heat resistance compared with uncoated carbide. This extends tool life when cutting at higher temperatures and reduces the tendency for built-up edge on sticky alloys.

Highlights

  • 4-flute carbide design improves chip evacuation and tool life
  • TiAlN coating increases heat resistance for higher cutting speeds
  • 1875 in diameter suits precision milling tasks
  • 375 in length of cut enables deeper passes
  • 3/16 in shank fits standard tool holders

Specifications

BrandCLEVELAND
TypeMilling

Questions about this item

Does the C80007 end mill arrive ready to use or do I need a separate holder?

The tool has a 3/16 in straight shank and fits standard ER collets or end-mill holders you already own; nothing else is required to start cutting.

When should I choose the C80007 over a different diameter or flute count?

Pick this 0.1875 in, four-flute carbide tool when you need a rigid, TiAlN-coated square end mill for finishing slots or profiles in steel and hardened alloys.

What does the 0.375 in length of cut mean for my machining?

You can plunge or side-mill up to 0.375 in deep in a single pass without exceeding the flute length, reducing tool deflection and improving surface finish.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.