Cleveland
Cleveland C75065 6-Flute HSS Square End Mill pneumatic accessory
A 6-flute HSS square end mill with a 1.75 in milling diameter and 1.375 in length of cut
- TypeMilling
- 6-flute design produces smooth finishes in milling operations
- 75 in diameter handles large material removal tasks
- 375 in length of cut reaches deep pockets
- High-speed steel with TiN coating resists wear at speed
- Weldon flat shank locks securely in tool holders
Cleveland 6-Flute HSS Square End Mill
The Cleveland C75065 is a 6-flute high-speed steel square end mill designed for center cutting milling operations. It features a TiN coating for extended tool life and a Weldon flat shank for secure clamping in compatible tool holders. This accessory suits machinists and maintenance technicians performing general-purpose slotting and profiling tasks.
Practical limits of the Weldon flat interface
The 3/4 in shank diameter with Weldon flat requires a matching end mill holder or collet system to prevent slippage under load. Non-coolant-through design means external flood or mist coolant must be directed to the cutting zone for heat management. The 1.375 in length of cut restricts maximum depth per pass in a single engagement.
Deciding specification: 1.75 in milling diameter
The 1.75 in cutting diameter determines the minimum slot width and maximum profile radius this tool can produce in one pass. Shops needing smaller features or tighter internal corners must select a different diameter. Buyers requiring longer reach or necked relief for deep pockets cannot use this tool.
Highlights
- 6-flute design produces smooth finishes in milling operations
- 75 in diameter handles large material removal tasks
- 375 in length of cut reaches deep pockets
- High-speed steel with TiN coating resists wear at speed
- Weldon flat shank locks securely in tool holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
Which Cleveland C75065 end mill diameter should I choose?
The C75065 is offered in a single 1.75 inch milling diameter, so no alternative size exists for this model.
What does the 1.375 inch length of cut mean in use?
It allows a maximum 1.375 inch deep cut per pass before the shank contacts the workpiece.
What does the 3/4 inch Weldon shank dictate for tool holding?
It requires a Weldon-compatible holder with a 3/4 inch bore and a set screw to lock the flat.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
