Cleveland
Cleveland C61913 0.75 in Carbide Square End Mill pneumatic accessory
A 0.75-inch carbide square end mill with four flutes for general-purpose milling
- TypeMilling
- 75 in milling diameter for precise cuts
- 4-flute carbide design improves material removal
- Uncoated surface suits general-purpose machining
- 1 in length of cut handles deeper passes
- 3/4 in shank fits standard tool holders
Cleveland C61913 Carbide End Mill
The Cleveland C61913 is a 0.75 inch carbide square end mill designed for general-purpose milling. Its four-flute geometry suits machinists and maintenance technicians who need reliable material removal in steel, cast iron and non-ferrous alloys. The uncooked carbide substrate provides hardness for extended tool life in conventional and CNC setups.
Setup checks before ordering
Verify that your tool holder accommodates a 3/4 inch straight shank and that the machine spindle can reach the required speed for a 0.75 inch diameter cutter. Confirm the 1 inch length of cut matches the depth of your feature and that the 3 inch overall length clears fixtures and workpiece clamps. Ensure coolant delivery is not required through the tool, as this model is non-coolant-through.
Behaviour under sustained load
The solid carbide body resists deflection during prolonged cuts, maintaining dimensional accuracy across repeated passes. Uncoated carbide generates more heat than coated alternatives, so chip evacuation and appropriate feed rates become critical during long production runs. Flute geometry helps evacuate chips, reducing the risk of re-cutting and edge wear when the tool stays engaged for extended periods.
Highlights
- 75 in milling diameter for precise cuts
- 4-flute carbide design improves material removal
- Uncoated surface suits general-purpose machining
- 1 in length of cut handles deeper passes
- 3/4 in shank fits standard tool holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
Does the C61913 end mill include any collets or tool holders, or must those be purchased separately?
The Cleveland C61913 is supplied as the carbide square end mill only; collets, tool holders and any coolant components are not included and must be sourced separately.
Should I choose a coated or uncoated version of this 0.75 in carbide square end mill for general-purpose milling?
This model is uncoated carbide; for general-purpose milling in non-ferrous materials or where coating wear is a concern, the uncoated version is the appropriate choice.
What does the 0.75 in milling diameter mean for reach and rigidity when the cutter is mounted in a standard 3/4 in tool holder?
The 0.75 in cutting diameter matches the 3/4 in shank, providing full-shank rigidity and a 1 in length of cut within the 3 in overall length for stable, vibration-resistant milling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
