Cleveland
Cleveland C61905 4-Flute Carbide Square End Mill
Carbide square end mill with 0.5625 inch milling diameter and 1.25 inch length of cut for general-purpose machining
- TypeMilling
- 4-flute design clears chips efficiently during milling
- 5625 in cutting diameter suits medium-duty profiling
- 25 in length of cut reaches deeper slots
- Carbide construction resists wear in steel and alloys
- Straight shank fits standard 9/16 in tool holders
Cleveland C61905 4-Flute Carbide Square End Mill
This solid carbide square end mill is built for general-purpose milling in a range of materials. It suits machinists and maintenance teams who need a reliable cutter for slotting, profiling and plunge cuts. The four-flute design provides a balance of chip evacuation and surface finish. It is a standard tool for workshop milling machines.
Uncoated Carbide Limits
The uncoated carbide substrate performs well in shorter runs and on easier-to-machine metals such as aluminium, brass and mild steel. Without a coating, tool life drops quickly in high-heat applications, abrasive alloys or extended production cycles. Coolant must be supplied externally because the tool has no through-coolant holes. Buyers who need maximum wear resistance for hard or abrasive materials should consider coated alternatives.
9/16 in Shank Diameter
The 9/16 in straight shank determines which tool holders and collets accept this cutter. Measure your holder capacity before ordering; a mismatch means the tool cannot be secured. The 0.5625 in cutting diameter and 1.25 in length of cut define the maximum width and depth per pass. If your setup requires a different shank size, this end mill will not fit.
Highlights
- 4-flute design clears chips efficiently during milling
- 5625 in cutting diameter suits medium-duty profiling
- 25 in length of cut reaches deeper slots
- Carbide construction resists wear in steel and alloys
- Straight shank fits standard 9/16 in tool holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
Should I choose the 9/16 in shank or a different shank size for this 0.5625 in milling diameter?
The shank diameter is 9/16 in, which matches the 0.5625 in milling diameter for direct fit in standard holders.
What does the 1.25 in length of cut mean for actual milling depth?
It allows up to 1.25 in of axial engagement in a single pass with the four-flute carbide design.
How does the straight shank interface affect tool holding and runout?
The straight 9/16 in shank fits standard collets and end mill holders, providing secure clamping for accurate rotation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
