Cleveland
Cleveland C61861 4-Flute Carbide Square Single End GP End Mill
A 4-flute carbide square end mill with a 0.3125 in diameter and 0.875 in length of cut for general-purpose milling
- TypeMilling
- 4-flute carbide design improves chip evacuation for smoother milling
- 3125 in cutting diameter suits precision slotting and profiling tasks
- 875 in length of cut enables deeper passes in a single operation
- Uncoated carbide substrate resists wear on ferrous and non-ferrous materials
- 5/16 in straight shank fits standard ER collets and holders
Cleveland C61861 Carbide End Mill
The Cleveland C61861 is a 4-flute carbide square end mill built for general-purpose milling operations. Its uncoated carbide construction suits machinists and fabricators working with a range of ferrous and non-ferrous materials. The single-end design provides a cost-effective tool for slotting, profiling and plunging tasks in a workshop environment.
Check Shank And Machine Compatibility
Verify that your tool holder or collet accepts a 5/16 in shank diameter before ordering. Confirm the machine spindle can accommodate the 2 1/2 in overall length and .875 in length of cut without interference. Ensure the workpiece setup allows for a non-coolant-through tool where external lubrication or dry cutting is preferred.
Uncoated Carbide Build For Daily Use
The solid carbide body resists wear and maintains edge sharpness longer than high-speed steel in repetitive production runs. An uncoated finish avoids coating delamination in abrasive materials and simplifies regrinding when the cutting edges dull. The straight shank and standard 4-flute geometry fit conventional holders for quick tool changes during a shift.
Highlights
- 4-flute carbide design improves chip evacuation for smoother milling
- 3125 in cutting diameter suits precision slotting and profiling tasks
- 875 in length of cut enables deeper passes in a single operation
- Uncoated carbide substrate resists wear on ferrous and non-ferrous materials
- 5/16 in straight shank fits standard ER collets and holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
Does the Cleveland C61861 end mill ship with a holder or collet, or must those be purchased separately?
The product is the 4-flute carbide square end mill itself. A tool holder or collet is not included and must be sourced separately.
The only size listed is 0.3125 in diameter with a 5/16 in shank — is there another version for a different cut width?
This model is offered in the single 0.3125 in milling diameter with a 5/16 in shank. Other diameters would carry a different part number.
With a 0.875 in length of cut and 2 1/2 in overall length, how deep can I plunge in one pass?
The 0.875 in length of cut is the maximum axial engagement. Plunge depth should not exceed that figure in a single pass.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
