Cleveland
Cleveland C61033 2-Flute Carbide Square End Mill
Two-flute carbide square end mill with a 0.28125 in. milling diameter and 0.875 in. length of cut
- TypeMilling
- Carbide construction resists wear for longer tool life
- Two-flute design clears chips efficiently in slotting
- 28125 in cutting diameter suits precision milling tasks
- 875 in length of cut handles deeper pockets
- 5/16 in shank fits standard collets and holders
Cleveland C61033 2-Flute Carbide End Mill
The Cleveland C61033 is a 2-flute carbide square end mill designed for general-purpose milling in a machine shop. It suits machinists and fabricators who need a reliable uncoated tool for slotting and profiling tasks. Buyers requiring coolant-through capability or specialised coatings for high-temperature alloys should select a different tool.
Uncoated Carbide Limits in General Milling
Uncoated carbide performs well in shorter runs but wears faster than coated alternatives when cutting abrasive or hardened materials. Heat builds up quickly without through-coolant, so aggressive feeds in deep pockets are not practical. The straight shank fits standard holders, yet the lack of a neck diameter means reach is limited to the length of cut.
Solid Carbide Build and Shank Fit
The solid carbide body provides rigidity for a 0.28125 in milling diameter with a 0.875 in length of cut. A 5/16 in straight shank seats securely in collets and end mill holders without additional adapters. At 2 1/2 in overall length, the tool balances stiffness and clearance for typical bench-top and CNC milling setups.
Highlights
- Carbide construction resists wear for longer tool life
- Two-flute design clears chips efficiently in slotting
- 28125 in cutting diameter suits precision milling tasks
- 875 in length of cut handles deeper pockets
- 5/16 in shank fits standard collets and holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
Is the 0.28125 in diameter the right choice for general-purpose milling?
The 0.28125 in milling diameter suits general-purpose slotting and profiling in a wide range of materials when paired with the 0.875 in length of cut.
What does the 0.875 in length of cut mean for depth per pass?
You can take axial depths up to 0.875 in per pass, limited by the flute length, while the 2-1/2 in overall length sets the maximum reach from the holder.
Does the 5/16 in shank fit standard ER collets or Weldon holders?
The 5/16 in straight shank fits ER collets, shrink-fit holders and Weldon flats designed for that diameter, providing a rigid connection for carbide tooling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
