Cleveland
Cleveland C60634 3-Flute Carbide Square End Mill .5 in
Three-flute carbide square end mill with a 0.5 in diameter and 0.625 in length of cut for aluminium milling
- TypeMilling
- 3-flute design clears chips efficiently in aluminium
- .5 in carbide body resists wear during high-speed milling
- .625 in length of cut enables deeper passes per operation
- 2 1/2 in overall length fits standard tool holders
- uncoated surface prevents coating buildup on non-ferrous metals
Cleveland C60634 3-Flute Carbide End Mill
This Cleveland C60634 end mill is a 3-flute carbide square single-end tool built for high-performance milling in aluminum and similar non-ferrous materials. Its uncoated carbide substrate and straight shank design suit CNC operators and machinists who need reliable material removal on manual or CNC milling machines.
Sustained load behaviour
The 0.5 in diameter and 0.625 in length of cut provide a rigid cutting zone that resists deflection during extended profiling or slotting passes. Uncoated carbide maintains consistent edge integrity without coating delamination risk, while the three-flute geometry balances chip evacuation and tool engagement for steady performance across longer production runs.
Setup checks before ordering
Verify your machine spindle accepts a 1/2 in straight shank and that the 2 1/2 in overall length clears your workholding and fixture arrangement. Confirm the application does not require through-coolant delivery, as this tool is non-coolant through. Ensure your material and cutting parameters match an uncoated carbide substrate for aluminum milling.
Highlights
- 3-flute design clears chips efficiently in aluminium
- .5 in carbide body resists wear during high-speed milling
- .625 in length of cut enables deeper passes per operation
- 2 1/2 in overall length fits standard tool holders
- uncoated surface prevents coating buildup on non-ferrous metals
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
Does the 0.5 in carbide end mill generate excessive heat when slotting aluminium all day?
Carbide conducts heat well and the uncoated 3-flute design clears chips fast, keeping temperatures manageable during extended aluminium runs.
What tool holder is required to run the 1/2 in shank on my mill?
A standard 1/2 in collet, end-mill holder or shrink-fit chuck matching your spindle taper will secure the shank.
Will the .625 in length of cut reach full depth on parts fixtured in my older 3-axis knee mill?
The .625 in flute length limits depth of cut, so verify your workpiece height and fixture clearance before starting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
