Cleveland
Cleveland C60629 3-Flute Carbide Square End Mill for Alum
Three-flute carbide square end mill with 0.375 inch diameter and 1.5 inch cut length for aluminium machining
- TypeMilling
- Three-flute design clears chips efficiently in aluminium
- Carbide substrate resists wear during high-speed milling
- Uncoated surface prevents built-up edge on soft alloys
- 5 in length of cut reaches deep pockets in one pass
- 60629 model optimised for non-ferrous material removal
Cleveland C60629 End Mill for Aluminium
The Cleveland C60629 is a solid carbide square end mill designed for high-performance milling of aluminium. Its three-flute geometry promotes efficient chip evacuation and a smooth finish in non-ferrous materials. The tool suits CNC operators and machinists who need reliable material removal rates in aluminium workpieces. The uncoated carbide substrate maintains sharp cutting edges for clean shearing action.
Uncoated Carbide Build with Straight Shank
The cutter features a straight, uncoated carbide body with a 3/8 inch shank diameter for standard tool holder compatibility. A 1.5 inch length of cut supports deep pocketing and profiling passes in a single operation. The overall length of 3 1/2 inches provides adequate reach for typical machining setups. Non-coolant-through design means external flood or mist coolant must be directed at the cutting zone.
Replaces Worn or General-Purpose Cutters
This end mill replaces dull high-speed steel or generic carbide tools that struggle with aluminium's tendency to build up on cutting edges. The dedicated three-flute geometry reduces chatter and prevents chip welding compared to two- or four-flute alternatives. The upgrade is worthwhile when cycle time and surface finish on aluminium parts are priorities. Shops machining steels or hardened alloys should select a coated tool with a different flute count.
Highlights
- Three-flute design clears chips efficiently in aluminium
- Carbide substrate resists wear during high-speed milling
- Uncoated surface prevents built-up edge on soft alloys
- 5 in length of cut reaches deep pockets in one pass
- 60629 model optimised for non-ferrous material removal
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
What shank diameter does the C60629 end mill use for tool-holder fit?
The cutter has a 3/8 in shank diameter, matching standard ER collets and Weldon flats for that size.
What overall length and flute length must the machine clearance accommodate?
Overall length is 3 1/2 in with a 1.5 in length of cut, so the spindle and work envelope must clear at least that depth.
How is this uncoated carbide mill installed without damaging the cutting edges?
Insert the shank fully into a clean collet or holder, torque to the holder spec, and avoid tapping the flutes — they chip easily.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
