Cleveland
Cleveland C60620 3-Flute Carbide Square End Mill .25 in
Carbide square end mill with three flutes for aluminium, 0.25 in diameter and 0.375 in cut length
- TypeMilling
- 3-flute design clears chips efficiently in aluminium
- .25 in diameter fits standard 1/4 in collets
- .375 in length of cut handles shallow pockets
- 2 in overall length suits compact tool holders
- Uncoated carbide resists built-up edge on non-ferrous metals
Cleveland C60620 end mill for aluminium
The Cleveland C60620 is a 3-flute carbide square end mill built for high-performance milling in aluminium. Its .25 in cutting diameter and uncoated carbide substrate suit CNC operators and machinists who need clean chip evacuation in non-ferrous materials. The straight shank matches standard .25 in tool holders for direct clamping.
Fits .25 in holders and frees chip space
The straight .25 in shank seats directly in ER collets, Weldon flats or shrink-fit holders without adapters. A .375 in length of cut handles shallow pockets and profiling passes while the 3-flute geometry opens wide gullets that eject aluminium chips before they re-weld. Overall length of 2 in keeps the tool compact inside tight machine envelopes.
Uncoated carbide runs cool in aluminium
Uncoated carbide avoids the built-up edge that coated tools can develop in sticky aluminium alloys. Three flutes balance material removal rate with lower cutting forces, reducing spindle load and vibration during slotting. The solid carbide body dissipates heat into the chips rather than the workpiece, extending edge life in dry or mist-lubricated cuts.
Highlights
- 3-flute design clears chips efficiently in aluminium
- .25 in diameter fits standard 1/4 in collets
- .375 in length of cut handles shallow pockets
- 2 in overall length suits compact tool holders
- Uncoated carbide resists built-up edge on non-ferrous metals
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
What is the maximum depth of cut this 0.25 in end mill can handle in a single pass?
The length of cut is 0.375 in, so the tool can engage material up to that depth in one pass before the shank contacts the workpiece.
How much heat builds up in the carbide body during extended high-speed profiling in aluminium?
The uncoated carbide substrate conducts heat away from the cutting edges, and the three-flute geometry provides large chip gullets that carry heat out with the swarf during sustained cuts.
What shank size must my tool holder accommodate to run this end mill?
The straight shank diameter is 1/4 in, so a 1/4 in collet, end-mill holder or shrink-fit chuck is required for proper clamping.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
