Cleveland
Cleveland C60498 2-Flute Carbide Square Single-End HP End Mill for Alum CTD pneumatic accessory
Two-flute carbide square end mill for aluminium with a .5 inch cutting diameter, 3.125 inch length of cut and 6 inch overall length
- TypeMilling
- 5 in milling diameter cuts wide aluminium slots
- 125 in length of cut reaches deep pockets
- Carbide construction resists wear in high-speed runs
- Uncoated surface prevents built-up edge on soft alloys
- Straight shank fits standard 1/2 in tool holders
Cleveland C60498 2-Flute Carbide End Mill
This uncoated carbide end mill features a 0.5 in milling diameter and a 3.125 in length of cut with a 6 in overall length. The square single-end geometry and straight shank are designed for high-performance milling in aluminium. It suits CNC operators and machinists who need reliable material removal in non-ferrous applications.
Suited for aluminium milling without coolant through
The tool works best for professionals running aluminium alloys on rigid machines where an uncoated carbide substrate performs well. It is not intended for hardened steels, exotic alloys or operations that require through-coolant delivery or specialised coating technologies for heat resistance.
0.5 in diameter with 3.125 in length of cut
This cutting envelope determines reach and rigidity for each pass, making it the primary check for fixture clearance and depth-of-cut planning. Verify that your holder accommodates the 1/2 in straight shank and that the flute length matches your programming requirements.
Highlights
- 5 in milling diameter cuts wide aluminium slots
- 125 in length of cut reaches deep pockets
- Carbide construction resists wear in high-speed runs
- Uncoated surface prevents built-up edge on soft alloys
- Straight shank fits standard 1/2 in tool holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
What milling diameter does the 0.5 in square end mill cut?
The Cleveland C60498 end mill has a 0.5 in milling diameter for aluminium and non-ferrous materials.
What shank diameter fits the 1/2 in tool holder?
The straight carbide shank measures 1/2 in, matching standard 1/2 in collets and holders.
How do you set the 3.125 in length of cut without crashing?
Program the 3.125 in flute length as maximum axial depth; verify stick-out against the 6 in overall length before starting the spindle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
