Cleveland
Cleveland C60277 4-Flute Carbide GP Square Double End Mill
A 4-flute carbide double-end mill with a 0.1875 in milling diameter and .5 in length of cut for general-purpose milling
- TypeMilling
- Carbide construction resists wear for longer tool life
- Four-flute design improves chip evacuation during milling
- Square end geometry produces flat-bottom cuts
- Double-end configuration provides two cutting ends per tool
- Weldon flat shank ensures secure holder grip
Cleveland C60277 4-Flute Carbide End Mill
The Cleveland C60277 is a square double-end mill designed for general-purpose milling tasks. It features a 0.1875 in milling diameter and a 3/8 in shank diameter with a Weldon flat for secure tool holding. This uncoated carbide tool suits machinists and fabricators working with standard materials.
Sustained cutting with uncoated carbide
The uncoated carbide substrate provides hardness for extended cutting without the thermal limitations of coated alternatives. A length of cut of .5 in and overall length of 3 in support stable engagement during longer passes. Non-coolant-through design means chip evacuation relies on external flood or mist systems.
Check shank fit and coolant setup
Verify your holder accepts a 3/8 in shank with a Weldon flat before ordering. Ensure your machine can deliver adequate external coolant or air blast for chip clearance since the tool lacks through-coolant capability. Confirm the .1875 in diameter matches your required feature size.
Highlights
- Carbide construction resists wear for longer tool life
- Four-flute design improves chip evacuation during milling
- Square end geometry produces flat-bottom cuts
- Double-end configuration provides two cutting ends per tool
- Weldon flat shank ensures secure holder grip
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
How much heat does the carbide tool generate during continuous milling?
Carbide handles high cutting temperatures better than high-speed steel, so the 0.1875 in diameter end mill resists heat buildup during prolonged use.
What tool holder or collet is needed for the 3/8 in shank?
A standard 3/8 in Weldon flat holder or compatible collet secures the shank; the flat prevents rotation under heavy feed.
Will the double-end design fit the same spindle clearance as my current single-end mills?
Overall length is 3 in with 0.5 in length of cut per end, so spindle reach and tool-change clearance match typical 3 in single-end tools.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
