Cleveland
Cleveland C60181 2-Flute Carbide Square Double-End GP End Mill
A double-ended carbide square end mill with a 0.3125 inch diameter and 0.75 inch length of cut for general-purpose milling
- TypeMilling
- Carbide construction resists wear for longer tool life
- Double-ended design provides two cutting edges per tool
- 3125 in diameter suits precision milling tasks
- 75 in length of cut enables deeper passes
- Weldon flat shank ensures secure holder grip
Cleveland C60181 Carbide End Mill
The Cleveland C60181 is a 2-flute carbide square double-end mill designed for general-purpose milling tasks. It suits machinists and fabricators who need a replaceable cutting tool for slotting or profiling in a range of materials. The uncoated carbide substrate provides hardness for abrasive wear resistance. This tool is not for buyers who require coolant-through capability for deep-pocket evacuation.
Double-End Geometry and Weldon Flat
The double-end configuration provides two cutting ends on a single tool body, effectively doubling the available tool life before replacement. A Weldon flat on the 3/8 in shank ensures secure clamping in a compatible end-mill holder, preventing pull-out during heavy cuts. The non-coolant-through design means chips must be cleared by external air blast or flood coolant. This tool is not for users who need through-spindle coolant delivery.
Uncoated Carbide Construction and Dimensions
The solid carbide construction offers high rigidity and heat resistance for consistent performance in steel, cast iron and non-ferrous alloys. With a 0.3125 in milling diameter and a 0.75 in length of cut, the tool reaches moderate depths while maintaining stability. The 3-1/2 in overall length fits standard tool holders and machine spindles. This tool is not for applications demanding coated substrates for high-temperature alloys.
Highlights
- Carbide construction resists wear for longer tool life
- Double-ended design provides two cutting edges per tool
- 3125 in diameter suits precision milling tasks
- 75 in length of cut enables deeper passes
- Weldon flat shank ensures secure holder grip
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
How often will the uncoated carbide flutes on the C60181 need to be resharpened or replaced?
The uncoated carbide flutes will dull with use and require resharpening or replacement once cutting edges wear beyond tolerance; lifespan depends on material cut and feed rates.
What limit appears first when running the 0.3125 in end mill continuously in a Weldon flat holder?
Heat buildup in the uncoated carbide body typically becomes the limiting factor during sustained cuts, especially without coolant-through capability.
How much noise and heat does the double-end mill generate during all-day operation in a 3/8 in shank?
Expect moderate router-level noise and noticeable heat at the shank and cutting zone; the uncoated carbide lacks coatings that reduce friction and thermal load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
