Cleveland
Cleveland C60176 2-Flute Carbide Square Double-End GP End Mill
Double-end carbide square end mill with 0.1875 in diameter and 0.5 in length of cut for general-purpose milling
- TypeMilling
- Carbide construction resists wear for longer tool life
- Two-flute design clears chips efficiently in general-purpose milling
- Double-ended geometry provides two cutting edges per tool
- 1875 in diameter suits precision slotting and profiling
- 5 in length of cut handles shallow pocketing operations
Cleveland C60176 Double-End End Mill
The Cleveland C60176 is a 2-flute carbide square end mill designed for general-purpose milling in a workshop. Its double-end configuration provides two cutting ends on a single tool body. This accessory suits machinists and fabricators who need a replaceable cutter for slotting or profiling tasks. It is not intended for high-volume production runs requiring specialised coated tooling.
0.1875 in milling diameter
The critical specification is the 0.1875 in milling diameter, which determines the slot width or profile radius this cutter produces. A 3/8 in shank diameter with a Weldon flat secures the tool in a standard end-mill holder. The length of cut is .5 in and the overall length is 3 in. Select this tool only when the required feature size matches the given cutting diameter.
Uncoated carbide thermals
The uncoated carbide substrate runs hotter than coated alternatives during sustained cuts, so flood coolant or frequent air blasts are advised to manage heat. Cutting forces stay moderate with two flutes, keeping spindle load and vibration at typical levels for light-duty milling. Power draw follows the machine's spindle curve at the chosen speed and feed; no extra supply capacity is implied.
Highlights
- Carbide construction resists wear for longer tool life
- Two-flute design clears chips efficiently in general-purpose milling
- Double-ended geometry provides two cutting edges per tool
- 1875 in diameter suits precision slotting and profiling
- 5 in length of cut handles shallow pocketing operations
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
How does the 0.1875 in milling diameter perform in a real machine?
The 0.1875 in diameter removes material with two flutes and a 0.5 in length of cut, suited for general-purpose slotting and profiling in a range of materials.
What does the Weldon flat shank cap in practice?
The 3/8 in Weldon flat locks into a matching end-mill holder, preventing pull-out and limiting run-out during heavy cuts.
What clearance does the 3 in overall length need to fit?
The 3 in overall length requires at least that much spindle-to-work clearance plus holder length, so check your machine’s Z-travel and fixture height.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
