Cleveland
Cleveland C60102 5-Flute Carbide Square Double-End Mill
A 5-flute carbide square double-end mill with a 0.25 in cutting diameter and 0.375 in length of cut for general milling
- TypeMilling
- 5-flute carbide design improves material removal
- 25 in cutting diameter for precision milling
- 375 in length of cut handles shallow profiles
- Double-end configuration provides two cutting ends
- Uncoated carbide suits general-purpose applications
Cleveland C60102 Double-End Mill
The Cleveland C60102 is a 5-flute carbide square end mill designed for general-purpose milling operations. Its double-ended construction provides two cutting ends per tool, effectively doubling the usable life for machinists and maintenance technicians. The uncoated carbide substrate suits a range of ferrous and non-ferrous materials in both CNC and manual setups.
Milling Diameter and Length Constraints
The cutter has a 0.25 in milling diameter and a 0.375 in length of cut, limiting the maximum depth of cut in a single pass. The overall length is 2 1/2 in with a straight 1/4 in shank, so reach and rigidity are defined by these fixed dimensions. There is no coolant-through capability and no neck relief, which restricts use in deep-pocket or high-heat applications.
Shank and Holder Compatibility
Verify that your tool holder or collet accepts a 1/4 in straight shank before ordering. The double-ended design requires sufficient clearance in the spindle or turret to accommodate the overall length without interference. Buyers who need coolant-through tooling or a necked shank for extended reach should consider a different tool style.
Highlights
- 5-flute carbide design improves material removal
- 25 in cutting diameter for precision milling
- 375 in length of cut handles shallow profiles
- Double-end configuration provides two cutting ends
- Uncoated carbide suits general-purpose applications
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
Which diameter and length of cut should I choose for this double-end mill?
The cutter has a 0.25 in milling diameter and a 0.375 in length of cut, giving a fixed size for light profiling and slotting passes.
How does the 0.25 in diameter perform in a real milling operation?
The small 0.25 in diameter suits light finishing cuts in steel or aluminium, with the 5-flute carbide design reducing chatter and improving surface finish.
What shank standard does the 1/4 in shank follow and what toolholders does it fit?
The straight 1/4 in shank is a common fractional size that fits standard 1/4 in collets, end-mill holders and shrink-fit adapters.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
