Cleveland
Cleveland C60043 4-Flute Carbide HP VI Square Single End Mill
A 4-flute carbide square end mill with a 0.5 in diameter and 1 in length of cut for milling operations
- TypeMilling
- 5 in milling diameter for precise slot widths
- Four-flute carbide design balances chip clearance and rigidity
- Uncoated surface avoids coating wear in non-ferrous cuts
- 1 in length of cut reaches standard pocket depths
- 3 in overall length fits common tool holders
Cleveland C60043 End Mill Overview
The Cleveland C60043 is a 4-flute carbide square end mill designed for general milling applications. It suits machinists and maintenance professionals requiring a reliable cutting tool for slotting and profiling tasks. The uncoated carbide substrate provides versatility across various workpiece materials.
Build Quality and Shank Interface
Constructed from solid carbide, the tool offers high hardness and wear resistance for extended life in production environments. The straight 1/2 inch shank diameter ensures a secure fit in standard collets and end mill holders. A 1 inch length of cut and 3 inch overall length provide adequate reach for typical pocketing operations.
Setup Compatibility Check
Verify that your tool holder accommodates a 1/2 inch straight shank before ordering. Confirm the machine spindle provides sufficient rigidity for a 0.5 inch diameter cutter at your intended speeds and feeds. Ensure your workpiece setup allows for the 1 inch cutting depth without interference from fixtures or clamps.
Highlights
- 5 in milling diameter for precise slot widths
- Four-flute carbide design balances chip clearance and rigidity
- Uncoated surface avoids coating wear in non-ferrous cuts
- 1 in length of cut reaches standard pocket depths
- 3 in overall length fits common tool holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
What milling diameter and shank size does the C60043 end mill use?
The cutter has a .5 in milling diameter and a 1/2 in shank diameter, matching standard 1/2 in collets and holders.
What overall length and length of cut must the tool holder accommodate?
Overall length is 3 in with a 1 in length of cut, so the holder needs at least 3 in of clear spindle travel.
How is the uncoated carbide end mill installed, and what common mistake should be avoided?
Clamp the 1/2 in shank securely in a matching collet or holder; the frequent error is leaving the shank under-tightened, which causes run-out and premature wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
