Cleveland
Cleveland C54624 Straight Flute Hand Tap M10x1.5
M10 × 1.5 straight-flute hand tap in high-speed steel, 74.61 mm overall with 31.75 mm thread length for 6H class fit
- TypeTaps
- M10 x 1.5 metric thread for standard fastening
- Straight flute design clears chips in through holes
- High-speed steel construction resists wear during hand tapping
- 61 mm overall length reaches deeper threads
- 50 mm drill size ensures 75 % thread engagement
Cleveland M10x1.5 Hand Tap — Purpose
This Cleveland C54624 straight-flute tap cuts M10 threads with a 1.5 mm pitch in through-holes or blind holes. It suits maintenance technicians, machinists and hobbyists who need to create or repair metric threads by hand.
Fit in the workshop
The 74.61 mm overall length and 31.75 mm thread length reach standard hole depths without excessive overhang. A 8.50 mm drill produces the recommended 75 percent thread engagement for the D6 limit and 6H class of fit. Bright high-speed steel resists wear in general-purpose steel and non-ferrous materials.
Upgrade path
The tap replaces worn or undersized tooling that no longer holds the 6H tolerance. Switching to this D6 limit is worthwhile when existing taps produce loose threads or when a fresh, uncoated HSS cutter restores consistent pitch diameter control.
Highlights
- M10 x 1.5 metric thread for standard fastening
- Straight flute design clears chips in through holes
- High-speed steel construction resists wear during hand tapping
- 61 mm overall length reaches deeper threads
- 50 mm drill size ensures 75 % thread engagement
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Taps |
Questions about this item
How deep can the M10x1.5 tap cut threads in a single pass?
The thread length is 31.75 mm, so the tap cuts up to that depth before you need to reverse and clear chips.
Does the high-speed steel tap generate excessive heat during extended hand-tapping sessions?
High-speed steel resists heat buildup well; with proper cutting fluid the tap stays cool enough for continuous use.
What drill bit must I have on hand before using this M10x1.5 tap?
A 8.50 mm drill bit is required to produce the correct 75 percent thread engagement for the M10x1.5 tap.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
