Cleveland
Cleveland C39682 3-Flute HSS Center Cutting Square Single End Mill pneumatic accessory
A 0.5-inch high-speed steel square end mill with three flutes, TiN coating, and a 1.25-inch length of cut
- TypeMilling
- 3-flute design improves chip evacuation
- HSS construction resists wear in general milling
- TiN coating reduces friction and heat buildup
- Center-cutting geometry allows plunge and side cuts
- Weldon flat shank prevents tool slippage
Cleveland C39682 3-Flute HSS End Mill
The Cleveland C39682 is a 3-flute high-speed steel square end mill designed for center cutting operations. It features a TiN coating and a Weldon flat shank for secure tool holding. The milling diameter is .5 in with a length of cut of 1.25 in and an overall length of 3 1/4 in. This pneumatic accessory suits general milling tasks in workshop environments.
Who this suits and who should look elsewhere
Machinists needing a coated HSS tool for slotting or profiling in steel or aluminium will find this cutter matches the .5 in diameter and 1.25 in depth of cut. Shops requiring carbide wear resistance, a different flute count, or a non-standard shank size should consider other tooling options. Buyers restricted by state sales limitations noted by the supplier must verify eligibility before ordering.
Specification that decides fit
The .5 in milling diameter combined with the 1.25 in length of cut defines the maximum slot width and depth this end mill can produce in a single pass. The 1/2 in Weldon shank determines holder compatibility. If your operation demands a larger cutting diameter, longer reach, or a different shank style, this model will not meet the requirement.
Highlights
- 3-flute design improves chip evacuation
- HSS construction resists wear in general milling
- TiN coating reduces friction and heat buildup
- Center-cutting geometry allows plunge and side cuts
- Weldon flat shank prevents tool slippage
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
What comes in the box with the Cleveland C39682 end mill and what else is needed to use it?
The box contains the single end mill with a Weldon flat shank; a compatible tool holder or collet for the 1/2 in shank must be supplied separately.
How do I choose between the available versions or capacities of this end mill?
The C39682 is offered in one specification — .5 in milling diameter, 1.25 in length of cut, 3 1/4 in overall length — so there are no alternate versions to select.
What does the .5 in milling diameter mean when the tool is mounted in a machine?
It defines the width of the slot or profile the 3-flute HSS cutter will produce in a single pass at full engagement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
