Cleveland
Cleveland C39596 3-Flute HSS Center Cutting Square Double End Mill
A 0.125-inch HSS TiN-coated square double end mill with a 0.375-inch cut length and 3/8-inch Weldon shank for general milling
- TypeMilling
- 3-flute design improves chip evacuation for smoother cuts
- HSS construction with TiN coating resists wear during extended use
- Center-cutting geometry allows direct plunging into workpieces
- Double-ended configuration provides two cutting ends per tool
- Weldon flat shank ensures secure clamping in standard holders
Cleveland C39596 Double End Mill
The Cleveland C39596 is a 3-flute high-speed steel square end mill designed for centre cutting in milling operations. It suits machinists and maintenance technicians who need a versatile tool for slotting, profiling and plunging in a range of ferrous and non-ferrous materials.
Weldon flat shank for standard holders
The 3/8 inch shank features a Weldon flat that locks securely into standard end mill holders, preventing spin during heavy cuts. Its double-end design effectively provides two cutting tools in one body, reducing tool change frequency and freeing carousel space for other operations.
0.125 inch diameter with 0.375 inch cut length
The small 0.125 inch milling diameter and 0.375 inch length of cut suit shallow pockets, narrow slots and fine detail work in softer alloys. The overall length of 3 1/16 inch limits reach in deep cavities, so the tool is not suited for long-reach or high-helix applications.
Highlights
- 3-flute design improves chip evacuation for smoother cuts
- HSS construction with TiN coating resists wear during extended use
- Center-cutting geometry allows direct plunging into workpieces
- Double-ended configuration provides two cutting ends per tool
- Weldon flat shank ensures secure clamping in standard holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
How deep can the 0.375 in length of cut go before the shank contacts the workpiece?
The 0.375 in length of cut defines the maximum depth in a single pass before the 3/8 in shank would touch the material.
Does the TiN coating reduce heat buildup during extended milling sessions?
The TiN coating on this high speed steel end mill lowers friction, helping manage heat during prolonged cutting.
What tool holder is required for the Weldon flat on the 3/8 in shank?
A standard Weldon-style end mill holder with a set screw that locks onto the flat is needed to secure the shank.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
