Cleveland
Cleveland C39082 2-Flute HSS Square Single End Mill TiN
Two-flute high-speed steel square end mill with TiN coating, 0.3125 in diameter and 1.375 in length of cut
- TypeMilling
- 2-flute design enables efficient chip clearance during milling operations
- High-speed steel construction provides durability for general-purpose cutting tasks
- TiN coating reduces friction and extends tool life in steel applications
- Weldon flat shank ensures secure locking in standard tool holders
- 375 in length of cut allows deeper profiling in a single pass
Cleveland C39082 End Mill
The Cleveland C39082 is a square end mill designed for general milling operations. It features a two-flute high-speed steel construction with a titanium nitride coating for extended tool life. The Weldon flat shank ensures secure clamping in standard holders. This new cutting tool suits machinists and maintenance professionals performing slotting or profiling tasks.
0.3125 in cutting diameter
The decisive specification is the 0.3125 in milling diameter, which determines the slot width or profile radius this tool produces. A 1.375 in length of cut sets the maximum depth in a single pass. The 3/8 in shank diameter must match your tool holder or collet size. Verify these dimensions against your print requirements before ordering.
Suited for manual and CNC milling
This end mill fits users cutting steel, cast iron or non-ferrous metals where HSS toughness outweighs carbide speed. The TiN coating improves wear resistance in moderate production runs. Shops needing higher material removal rates, harder workpiece materials or longer reach should evaluate carbide alternatives with different geometries.
Highlights
- 2-flute design enables efficient chip clearance during milling operations
- High-speed steel construction provides durability for general-purpose cutting tasks
- TiN coating reduces friction and extends tool life in steel applications
- Weldon flat shank ensures secure locking in standard tool holders
- 375 in length of cut allows deeper profiling in a single pass
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
How does the 0.3125 in milling diameter perform in a real machine?
The 0.3125 in cutting diameter removes material in a single pass for slots or profiles of that exact width, producing a square-bottomed finish in steel, aluminium or plastic when run at HSS speeds.
What does the Weldon flat on the 3/8 in shank cap in practice?
The Weldon flat locks into a standard 3/8 in end-mill holder with a set screw, preventing the tool from spinning or pulling out during heavy radial cuts.
What clearance does the 3 1/8 in overall length and 1.375 in length of cut need to fit?
The tool requires a holder and spindle combination that accommodates at least 3 1/8 in from the spindle face, with 1.375 in of usable flute length exposed for the depth of cut.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
