Cleveland
Cleveland C33784 2-Flute HSS Square Single End Mill TiN
A 2-flute HSS square end mill with TiN coating for general-purpose milling
- TypeMilling
- 75 in milling diameter for precise slot cutting
- Two-flute design clears chips efficiently in deep cuts
- High-speed steel body resists wear in steel and iron
- TiN coating reduces friction and extends tool life
- Weldon flat shank locks securely in standard tool holders
Cleveland 33784 End Mill Application
The Cleveland 33784 is a square end mill designed for general milling operations. Its high speed steel construction with TiN coating provides wear resistance across a range of materials. The 2-flute geometry suits both slotting and profiling tasks in workshop environments. Machinists gain a reliable tool for standard metal removal jobs.
Suited For Standard Milling Work
This cutter fits machinists performing routine slotting, side milling, or contouring in steel and non-ferrous alloys. The Weldon flat shank secures firmly in standard tool holders. It is not suited for high-volume production runs demanding solid carbide tool life. Buyers needing extended reach or specialised geometries should evaluate alternative tooling options.
1.3125 Inch Length of Cut Defines Reach
The 1.3125 in length of cut sets the maximum axial depth per pass for this 0.75 in diameter tool. This dimension determines whether the mill can reach full depth in your workpiece without multiple setups. Verify the required cutting depth against this figure before selecting the cutter for a specific job.
Highlights
- 75 in milling diameter for precise slot cutting
- Two-flute design clears chips efficiently in deep cuts
- High-speed steel body resists wear in steel and iron
- TiN coating reduces friction and extends tool life
- Weldon flat shank locks securely in standard tool holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
How much heat and vibration should I expect from the 0.75 in TiN-coated HSS end mill during extended milling sessions?
The TiN coating on this high-speed steel cutter reduces friction and heat buildup, helping the tool run cooler and with less vibration during long cuts in steel or cast iron.
What tool holder or machine spindle is required to use the 5/8 in Weldon-flat shank on this end mill?
You need a milling machine or CNC spindle equipped with a 5/8 in Weldon-compatible end-mill holder that clamps on the flat to prevent the cutter from pulling out under load.
Will the 1.3125 in length of cut and 3 3/4 in overall length fit my older knee-mill that has limited Z-axis travel?
At 3 3/4 in overall length and 1.3125 in flute length, this end mill is compact enough for most manual knee-mills with standard Z clearance, but verify your specific machine's maximum tool length.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
