Cleveland
Cleveland C33416 4-Flute HSS Center Cutting Square Single End Mill
A 4-flute HSS square end mill with a 0.5 inch cutting diameter and 2 inch length of cut
- TypeMilling
- 4-flute design improves material removal in milling
- HSS construction resists wear during high-speed cutting
- Center-cutting geometry enables plunge and profile operations
- TiCN coating extends tool life in abrasive materials
- Weldon flat shank ensures secure clamping in holders
Cleveland C33416 HSS Square End Mill
The Cleveland C33416 is a 4-flute high speed steel square end mill with a TiCN coating for extended tool life. Its center cutting design allows for plunge milling and profiling in a single tool. The Weldon flat shank ensures secure clamping in standard holders. This cutter is built for general purpose milling tasks.
Machinists needing a versatile 0.5 inch diameter
This end mill suits machinists performing slotting, side milling and plunging operations in steel and cast iron. The 2 inch length of cut provides reach for deeper features. Buyers requiring coolant through capability or a different shank style should look at other options. Non centre cutting applications are not the primary purpose of this design.
0.5 inch milling diameter with Weldon flat
The critical specification is the 0.5 inch milling diameter combined with a 1/2 inch Weldon flat shank. This exact size match guarantees compatibility with corresponding tool holders and machine spindles. Verify your holder accepts this shank configuration before ordering. The overall length is 4 inches.
Highlights
- 4-flute design improves material removal in milling
- HSS construction resists wear during high-speed cutting
- Center-cutting geometry enables plunge and profile operations
- TiCN coating extends tool life in abrasive materials
- Weldon flat shank ensures secure clamping in holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
How deep can the 2 in length of cut reach before the shank contacts the workpiece?
The 2 in length of cut sets the maximum depth before the 0.5 in shank touches the material.
Does the TiCN coating keep the tool cool enough for continuous dry milling?
TiCN reduces friction and heat buildup, but sustained dry cutting still generates significant temperature at the cutting edges.
Will the Weldon flat on the 1/2 in shank fit my existing tool holder?
The 1/2 in shank with Weldon flat matches standard Weldon-style holders that accept a 0.5 in diameter shank.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
