Cleveland
Cleveland C32219 Roughing End Mill .5 in 1.25 in LOC
A four-flute powdered-metal roughing end mill with a .5 in diameter and 1.25 in length of cut for heavy material removal
- TypeMilling
- .5 in diameter for precise milling cuts
- 25 in length of cut enables deeper material removal
- Powdered metal HSS-E construction resists wear in tough alloys
- TiN coating reduces friction and extends tool life
- Weldon flat shank provides secure, non-slip clamping
Cleveland C32219 roughing end mill
The Cleveland C32219 is a 4-flute roughing end mill made from powdered metal HSS-E with a TiN coating. It has a .5 in milling diameter and a 1.25 in length of cut. The tool features a Weldon flat shank and an overall length of 3 1/4 in. It is designed for heavy material removal in general milling applications.
Machinists removing large amounts of material
This end mill suits machinists who need aggressive stock removal in steel or other ferrous metals. The coarse pitch and powdered metal substrate handle high feed rates well. Shops that require a fine surface finish straight from the cutter should look at a finishing end mill instead. Buyers needing a different cutting diameter or longer reach must select another tool.
.5 in cutting diameter with 1.25 in length of cut
The .5 in diameter and 1.25 in length of cut define the maximum width and depth this tool can engage in a single pass. These dimensions determine whether the end mill fits the feature size and pocket depth of the workpiece. Verify both measurements against your part geometry before ordering. The 32219 model number identifies this specific size combination in the Cleveland range.
Highlights
- .5 in diameter for precise milling cuts
- 25 in length of cut enables deeper material removal
- Powdered metal HSS-E construction resists wear in tough alloys
- TiN coating reduces friction and extends tool life
- Weldon flat shank provides secure, non-slip clamping
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
What shank diameter and Weldon flat does the C32219 use for tool-holder fit?
The end mill has a 1/2 in shank diameter with a Weldon flat, matching standard 1/2 in collets and side-lock holders.
What are the cutting diameter, length of cut and overall length that define the tool envelope?
It cuts at 0.5 in diameter, provides a 1.25 in length of cut and measures 3 1/4 in overall length.
How is the TiN-coated PM+ HSS-E rougher mounted and what alignment step is often missed?
Insert the Weldon flat into a side-lock holder, tighten the set screw on the flat — not the shank body — to prevent run-out.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
