Cleveland
Cleveland 80183 2-Flute Carbide Square Double-End GP End Mill .375 in .75 in
A 3/8-inch shank carbide end mill with two flutes and a square profile on both ends, offering a 0.75-inch length of cut for general-purpose milling
- TypeMilling
- Double-end design doubles usable tool life
- 2-flute carbide geometry clears chips in aluminium and plastics
- TiAlN coating resists heat for longer edge retention
- .375 in diameter matches standard 3/8 in tool holders
- .75 in length of cut handles medium-depth slots
Cleveland 80183 2-Flute Carbide End Mill
This Cleveland 80183 end mill is a double-ended square milling cutter made from solid carbide with a TiAlN coating. It suits general-purpose machining on CNC or manual milling machines where a .375 in diameter is required.
Sustained-load behavior of the TiAlN-coated carbide
The TiAlN coating resists heat buildup during extended cutting passes, helping the carbide edges retain hardness. Two flutes provide efficient chip evacuation so the tool runs cooler in deeper slots or pockets.
Build quality and shank implications for daily use
A straight 3/8 in shank fits standard ER collets or Weldon holders without adapters. The double-ended design effectively doubles tool life per holder change, and the non-coolant-through body simplifies setup on machines without through-spindle delivery.
Highlights
- Double-end design doubles usable tool life
- 2-flute carbide geometry clears chips in aluminium and plastics
- TiAlN coating resists heat for longer edge retention
- .375 in diameter matches standard 3/8 in tool holders
- .75 in length of cut handles medium-depth slots
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
How much heat builds up during long runs with the TiAlN coating on this .375 in carbide end mill?
The TiAlN coating reduces friction and handles higher temperatures than uncoated carbide, helping the tool stay cooler during extended milling passes.
What tool holder or collet is required for the 3/8 in shank on this double-end mill?
A standard 3/8 in collet, end-mill holder or shrink-fit chuck with a matching bore will secure the straight shank.
Will the 3-1/2 in overall length clear the spindle and work envelope on an older knee mill?
At 3-1/2 in overall length it fits most knee-mill spindles, but confirm the machine’s maximum tool length and Z-travel before cutting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
