Cleveland
Cleveland 80062 4-Flute Carbide HP VI Crn Rad Single EndMill
Carbide corner-radius end mill with 0.625 in diameter, 0.03 in radius, 1.25 in flute length and 3.5 in overall length
- TypeMilling
- 625 in milling diameter handles medium-to-large cuts
- Four-flute carbide geometry increases material removal rate
- TiAlN coating reduces wear at high cutting speeds
- 03 in corner radius strengthens edges against chipping
- 25 in flute length provides reach for deeper pockets
Cleveland 80062 Corner Radius End Mill
This Cleveland 80062 is a 4-flute carbide corner radius end mill designed for high-performance milling operations. The tool features a TiAlN coating for enhanced wear resistance and heat dissipation during cutting. Its single-end design with straight shank makes it suitable for precision machining tasks in professional workshops.
Suited for ferrous milling.
Machinists cutting steel, stainless steel, or cast iron will benefit from the carbide substrate and TiAlN coating combination. The corner radius geometry adds strength for profiling and pocketing applications. Shops primarily machining aluminium, plastics, or abrasive composites should select a tool with a different coating and flute geometry optimised for those materials.
0.625 inch milling diameter
The 0.625 inch cutting diameter and 0.03 inch corner radius define the tool's profile and corner strength for specific radii requirements. A 1.25 inch length of cut and 3 1/2 inch overall length provide reach for standard depth pockets. Verify these dimensions match your toolholder capacity and part geometry before purchase.
Highlights
- 625 in milling diameter handles medium-to-large cuts
- Four-flute carbide geometry increases material removal rate
- TiAlN coating reduces wear at high cutting speeds
- 03 in corner radius strengthens edges against chipping
- 25 in flute length provides reach for deeper pockets
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
What comes with the Cleveland 80062 end mill and is a tool holder sold separately?
The package contains the single end mill only. A compatible collet or end-mill holder for 0.625 in shank must be purchased separately.
How do I choose between the listed corner-radius options for this cutter?
This model has a fixed 0.03 in corner radius. Select it when a small radius is required for fillets or to reduce corner chipping in the workpiece.
What does the 0.625 in milling diameter mean when the tool is in the spindle?
It is the cutting diameter that determines the width of each pass. The 1.25 in flute length sets the maximum depth of cut in a single engagement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
