Cleveland
Cleveland 80048 4-Flute Carbide HP VI Square End Mill
4-flute carbide square end mill with TiAlN coating, .5 inch diameter and 1.25 inch cut length for milling operations
- TypeMilling
- 4-flute carbide design enables efficient material removal
- TiAlN coating extends tool life in high-speed milling
- 5 in diameter suits precision machining tasks
- 25 in length of cut handles deeper profiles
- 1/2 in shank fits standard tool holders
Cleveland 80048 4-Flute Carbide End Mill
This Cleveland 80048 end mill is a carbide square end mill built for general milling operations. It features a 0.5 in milling diameter and a 1/2 in shank diameter for standard toolholding. The overall length is 3 in with a length of cut of 1.25 in.
Suited for general milling.
Machinists running general milling jobs on standard holders will find this tool fits directly. The non-coolant-through design means it does not serve operations that require internal coolant delivery. Buyers who need through-coolant capability should look at a different tool.
0.5 in milling diameter with TiAlN coating
The 0.5 in milling diameter is the primary dimension that determines fit in the programmed toolpath. A TiAlN coating is applied to the carbide substrate. The straight flute geometry and 4-flute configuration complete the cutting profile.
Highlights
- 4-flute carbide design enables efficient material removal
- TiAlN coating extends tool life in high-speed milling
- 5 in diameter suits precision machining tasks
- 25 in length of cut handles deeper profiles
- 1/2 in shank fits standard tool holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
How do I install the 0.5 in carbide square end mill in my milling machine, and what step is often missed?
Secure the 1/2 in shank fully in a precision collet or shrink-fit holder, then verify run-out before cutting; the step often missed is confirming the holder is clean and rated for carbide shanks.
What maintenance or replacement will the TiAlN coated 4-flute end mill need after extended use?
The TiAlN coating wears gradually; plan to resharpen or replace the tool once flank wear reaches the maximum allowance for your tolerance, typically after several regrinds of the 1.25 in length of cut.
What limit appears first on the 3 in overall length carbide end mill during sustained heavy profiling?
Deflection of the 3 in overall length becomes the limiting factor before the carbide substrate overheats, so reduce axial depth or increase feed per tooth to control chatter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
