Cle-Line
Cle-Line C23132 11/64" HSS Black/Gold 135° Split Point Drill Bit
11/64" high-speed steel jobber bit with 135° split point for accurate starts
- TypeDrill Bits
- MaterialHAWA
- High-speed steel construction resists wear during repeated drilling
- 135° split point reduces walking and starts holes accurately
- Black oxide finish adds corrosion resistance and reduces friction
- 11/64 inch diameter suits precise fractional-inch applications
- Jobber length provides standard reach for general-purpose drilling
Product identity
The Cle-Line C23132 is a fractional drill bit sized at 11/64 inch with a decimal equivalent of .1719. It is made from High Speed Steel and finished in black oxide with gold accents. The 135 degree split point helps the bit start on contact and reduces wandering. This accessory suits general-purpose drilling in metal, wood and plastic for trade users and DIYers alike.
Practical limits of the jobber length standard
The jobber length design follows the common flute-to-overall ratio used for everyday drilling tasks. It provides sufficient reach for typical through-holes and blind holes in sheet metal, bar stock and timber. The straight shank fits standard three-jaw chucks without an adapter. The split point geometry improves centring but does not replace a centre punch on hard or curved surfaces. The bit has no coolant holes, so it is not suited for deep-hole or high-volume production drilling where internal cooling is required.
What to check before ordering
Verify that your drill chuck accepts a straight shank of this diameter and that the chuck capacity covers the .1719 inch size. Confirm the workpiece material is compatible with High Speed Steel cutting edges and that you can supply external lubrication or cutting fluid when drilling metal. Ensure the 135 degree point angle matches the hole quality and chip clearance you need for the application. Buyers who require coolant-through capability or a different point geometry should select another model.
Highlights
- High-speed steel construction resists wear during repeated drilling
- 135° split point reduces walking and starts holes accurately
- Black oxide finish adds corrosion resistance and reduces friction
- 11/64 inch diameter suits precise fractional-inch applications
- Jobber length provides standard reach for general-purpose drilling
Specifications
| Brand | CLE-LINE |
|---|---|
| Type | Drill Bits |
| Material | HAWA |
Questions about this item
Is the 11/64" size the only diameter available for this bit?
The listing covers the single 11/64" diameter; other sizes are sold under different part numbers.
How does the 135° split point perform once the bit is in the drill?
The 135° split point centres the bit on contact and reduces walking, so holes start cleanly without a centre punch.
Does the straight shank fit every 3/8" chuck?
The jobber-length shank is sized for standard three-jaw chucks that accept up to 3/8" round shanks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
