We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve-inch marine subwoofer with RGB lighting and silver grille beside compact mono amplifier

Clarion

Clarion CM3013WL 12" Marine Subwoofer & XC2110 Amplifier Bundle

SKU CH-94XZ-QMACM

A 12-inch marine subwoofer with 300 W RMS handling, dual 2-ohm coils, IP55-rated water resistance and built-in RGB illumination, paired with a compact mono amplifier delivering 300 W at 2 ohms

  • TypeSubwoofers
  • 300 W RMS delivers deep, reliable bass
  • IP55-rated front panel withstands spray and splash
  • Dual 2 Ω coils enable flexible amplifier wiring
  • Built-in RGB lighting adds customisable marine ambience
  • 200 W at 4 Ω or 300 W at 2 Ω from compact mono amp

Marine Audio Bundle

The Clarion CM3013WL 12-inch subwoofer and XC2110 amplifier arrive as a matched pair for boat owners who want dedicated low-frequency output. The subwoofer handles 300W RMS with dual 2-ohm voice coils for flexible wiring. The compact mono amplifier delivers 200W at 4 ohms or 300W at 2 ohms, aligning directly with the subwoofer's continuous rating.

Weather-Resistant Build

The subwoofer meets IP55 water ingress protection on the front face and passes ASTM D4329 UV exposure plus ASTM B117 salt fog testing. An IMPP cone and high-impact ASA plastic basket resist marine environments. A male waterproof connector integrates speaker and RGB leads on the basket, while a female counterpart is included for the wiring run. Mounting requires a 272 mm hole diameter and 139 mm depth.

Upgrade Path

This bundle replaces a factory marine speaker that cannot reproduce deep bass or survive direct spray. The 300W RMS subwoofer and 300W amplifier at 2 ohms suit owners adding a first subwoofer stage to an existing head unit. Builders needing more than 300W RMS per channel or a multi-channel amplifier for full-range speakers should look elsewhere.

Highlights

  • 300 W RMS delivers deep, reliable bass
  • IP55-rated front panel withstands spray and splash
  • Dual 2 Ω coils enable flexible amplifier wiring
  • Built-in RGB lighting adds customisable marine ambience
  • 200 W at 4 Ω or 300 W at 2 Ω from compact mono amp

Specifications

TypeSubwoofers

Questions about this item

What impedance loads does the XC2110 amplifier support at its rated 14.4 V output?

The amplifier delivers 200 W into 4 ohms and 300 W into 2 ohms, both rated at 1 % THD+N with a 14.4 V supply.

What mounting hole diameter and depth does the 12-inch subwoofer require?

The subwoofer needs a 10.71-inch (272 mm) diameter cut-out and 5.45 inches (139 mm) of mounting depth behind the panel.

How do the dual 2-ohm voice coils on the CM3013WL connect to the mono XC2110 amplifier?

Wire the two coils in series to present a 4-ohm load, or in parallel for a 2-ohm load, matching the amplifier's rated impedance options.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.