CKD
CKD 4F410-10-AC220V Magnetic Valve W Series electrician tool
A 220 V magnetic valve for outdoor use, supplied as a single W-series unit in a red finish
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- AC220V coil enables direct mains operation
- W Series design suits outdoor installations
- Magnetic valve action gives fast switching response
- Red finish provides clear visual identification
- Single valve unit simplifies pneumatic circuit layout
Outdoor Magnetic Valve W Series
The CKD 4F410-10-AC220V is a single solenoid valve built for outdoor installations. It suits electricians and maintenance teams who need reliable fluid control in exposed environments. The red finish aids quick identification in panel layouts. Supplied as one unit per box.
AC Two Twenty Volt Coil Limitation
Operating on AC 220V power, the coil is fixed to that voltage and cannot be used on DC or lower-voltage systems without a separate transformer. The W Series designation indicates a specific porting pattern that may not interchange with other CKD series. Verify circuit compatibility before wiring.
Port Size Ten Millimetres
The valve body uses a 10 mm port connection, which determines the maximum flow capacity and the required fitting size. Select this model only when your piping matches that port diameter. A different port size requires a different valve body.
Highlights
- AC220V coil enables direct mains operation
- W Series design suits outdoor installations
- Magnetic valve action gives fast switching response
- Red finish provides clear visual identification
- Single valve unit simplifies pneumatic circuit layout
Specifications
| Brand | CKD |
|---|---|
| Model | CKD 4F410-10-AC220V |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Should I choose the 10 mm or the 220 V version for my setup?
The model combines a 10 mm port with a 220 V AC coil; both are fixed in this single-valve unit.
What does the 410 designation tell me about flow or pressure in real use?
The 410 series code identifies the valve body size and internal passage dimensions used in the W Series.
Is the AC 220 V interface compatible with standard industrial power supplies?
Yes, the coil is rated for 220 V AC and connects directly to common single-phase mains.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
