Cisco Systems, Inc.
Cisco Systems, Inc. VG202XM 2-port analog voice gateway switch module
Connects two analogue phones or fax machines to a VoIP system over 100 Mb LAN
- Connects two analog devices to IP voice systems
- 100 Mb LAN uplink for reliable VoIP transport
- Low-density 2-port design fits small deployments
- Cisco IOS software enables unified management
- Integrates with Unified CM or Express environments
Product Identity
The Cisco VG202XM is a two-port analog voice gateway module that connects legacy phones, fax machines and modems to an IP telephony system. It runs Cisco IOS software and integrates with Unified Communications Manager or Unified Communications Manager Express for centralised call control.
Fit and Limits
This module suits organisations with a small number of analogue endpoints that need to join an existing Cisco voice infrastructure. It does not suit sites that require high-density analogue connectivity or deployments without a Cisco call-control platform.
Capacity and Headroom
The two FXS ports comfortably handle a handful of phones, fax devices or speakerphones in a branch or small office. Capacity runs out when analogue port counts grow beyond two, at which point the four-port VG204XM, 24-port VG224 or 160-port VG350 become the appropriate alternatives.
Highlights
- Connects two analog devices to IP voice systems
- 100 Mb LAN uplink for reliable VoIP transport
- Low-density 2-port design fits small deployments
- Cisco IOS software enables unified management
- Integrates with Unified CM or Express environments
Specifications
| Brand | Cisco Systems |
|---|---|
| Shipping weight | 3.18 kg |
| Package size | 421 × 332 × 198 mm |
Questions about this item
What Cisco Unified Communications Manager version is required for the VG202XM to register its 2 FXS ports?
The VG202XM runs Cisco IOS software and registers its two analog ports to Cisco Unified Communications Manager or Unified CM Express; the specific minimum release is documented in the Cisco IOS Voice Configuration Guide for the VG200 series.
Can the VG202XM share a 100 Mb LAN uplink with a legacy Cisco VG224 24-port gateway?
Yes, both the VG202XM and the VG224 use a 100 Mb Ethernet uplink and register to the same Unified CM cluster, so they can coexist on the same access switch without bandwidth conflict.
Which LED pattern confirms the VG202XM has registered both analog ports to Unified CM?
After boot, the module’s status LED turns solid green and each of the two port LEDs shows steady green when its FXS port has successfully registered to Unified Communications Manager.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
IBM
IBM 00JX058 Xeon E5-2640 v3 8-core 2.60 GHz 20 MB L3 90 W switch module
$217.99
0.00259614BTC
In stock
