We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 9.84 ft Cisco twinax cable with SFP+ male connectors both ends

Cisco Systems, Inc.

Cisco Systems, Inc. SFP-H10GB-CU3M= 9.84 ft Twinax Cable

SKU CH-A7K5-TFGGM MPN SFP-H10GB-CU3M=

A 9.84 ft SFP+ direct-attach twinax cable for 10 GbE links between compatible Cisco Catalyst and Nexus switches

  • TypeCable
  • ColorBlack
  • SpecificationsCable Type: Twinaxial Cable Length: 9.84 ft Connector Type o
  • FeaturesCisco SFP+ Modules: SFP-10G-SR SFP-10G-LR
  • Ready-to-use 3-metre direct-attach cable for 10 GbE links
  • SFP+ male connectors on both ends for hot-swap insertion
  • Twinax copper construction keeps latency low and power draw minimal
  • Tested with Catalyst 2960, Nexus 93180, 9336, 9372 and UCS 6140 platforms
  • Meets SFF-8436 and IEEE 802.3ae specifications for reliable operation

10 GbE Direct-Attach Cable

This twinaxial cable connects two SFP+ ports at 10 Gb/s over a 9.84 ft run. It is built for network operators who need a low-latency link between switches or servers without the cost of optics. The passive copper assembly is compatible with Cisco Catalyst 2960, 2960G, 2960S, Nexus 93180, 9336, 9372 and UCS 6140 platforms.

Passive Cooling and Low Power

Because the cable contains no active electronics, it draws negligible power and generates no heat of its own. There are no fans or onboard circuitry to create acoustic noise, so the link adds nothing to the thermal budget of a rack. The SFF-8436 compliant construction meets IEEE 802.3ae electrical limits for reliable operation.

Rack-Friendly Copper Interconnect

Male SFP+ connectors on both ends plug directly into transceiver cages, freeing two optical module slots and the patch cables they would require. The 3 m length suits adjacent or nearby rack units while avoiding the bend-radius constraints of fibre. Buyers who need longer reaches or fibre media will need a different solution.

Highlights

  • Ready-to-use 3-metre direct-attach cable for 10 GbE links
  • SFP+ male connectors on both ends for hot-swap insertion
  • Twinax copper construction keeps latency low and power draw minimal
  • Tested with Catalyst 2960, Nexus 93180, 9336, 9372 and UCS 6140 platforms
  • Meets SFF-8436 and IEEE 802.3ae specifications for reliable operation

Specifications

BrandCisco Systems, Inc
Part NumberSFP-H10GB-CU3M=
TypeCable
ColorBlack
SpecificationsCable Type:
Twinaxial
Cable Length:
9.84 ft
Connector Type on First End:
SFP+ Network
Connector Gender on First End:
Male
Connector on First End Details:
1 x SFP+ Network
Connector Type on Second End:
SFP+ Network
Connector Gender on Second End:
Male
Connector on Second End Details:
1 x SFP+ Network
Conductor:
Copper
Device Supported:
Network Device
FeaturesCisco SFP+ Modules:
SFP-10G-SR
SFP-10G-LR
Shipping weight0.14 kg
Package size227 × 211 × 32 mm

Questions about this item

How do I install the SFP-H10GB-CU3M= cable, and what step is often missed?

Insert each SFP+ male connector into a compatible SFP+ port until the latch clicks; the step often missed is confirming the latch is fully engaged on both ends.

What maintenance or replacement will this 9.84 ft twinax cable need later?

No scheduled maintenance is required; replace the cable only if the copper conductors, SFP+ latches, or SFF-8436 compliance are physically damaged.

What limit appears first on this 3 m direct-attach cable under sustained 10 GbE use?

The 9.84 ft length is the primary limit; it meets IEEE 802.3ae for 10 GbE, so signal integrity holds across the full 3 m without active equalisation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.