We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rackmount switch with 48 RJ45 ports and four SFP uplinks

Cisco Systems, Inc.

Cisco Systems, Inc. Meraki MS120-48FP-HW 48-port network switch

SKU CH-1BFS-YFP4N

Managed 48-port Gigabit switch with 4 SFP uplinks and 740 W PoE+ budget

  • FormatRackmount
  • Network Management TypeManaged
  • Primary Ports48 x 10/100/1000BASE-T Ethernet RJ45 with auto negotiation a
  • VLAN SupportYes
  • Jumbo Frames9578 bytes
  • ProtocolsHCRP, SPP
  • Managed via cloud dashboard with multi-factor authentication and RBAC
  • 48 gigabit RJ45 ports with auto-negotiation and four 1G SFP uplinks
  • 740 W PoE+ budget powers access points, phones and cameras
  • Fanless 1U rackmount design operates silently from 0 to 45 °C
  • Non-blocking 104 Gbps switching capacity with jumbo frames up to 9578 bytes

48-port managed switch with PoE+

The Meraki MS120-48FP-HW delivers 48 Gigabit RJ45 ports and four 1G SFP uplinks in a 1U rackmount chassis. It provides up to 740W of PoE+ power for access points, phones and cameras. Cloud-managed operation suits distributed IT teams that need central visibility without on-site controllers.

Zero-touch provisioning and fanless build

The switch joins the Meraki Dashboard automatically once powered and connected, so configuration begins before the unit is racked. A fixed internal supply accepts 100-240V AC at 47-63 Hz. The fanless design eliminates moving parts but requires adequate rack airflow to stay within the 0-45°C operating range.

Non-blocking 104 Gbps fabric under load

The switching fabric supports up to 104 Gbps of non-blocking throughput, sustaining wire-speed forwarding across all ports during prolonged traffic. Power draw ranges from 8W idle to 908W at full PoE+ load, with 37W typical idle consumption. Jumbo frames up to 9578 bytes reduce per-packet overhead for storage or backup workloads.

Highlights

  • Managed via cloud dashboard with multi-factor authentication and RBAC
  • 48 gigabit RJ45 ports with auto-negotiation and four 1G SFP uplinks
  • 740 W PoE+ budget powers access points, phones and cameras
  • Fanless 1U rackmount design operates silently from 0 to 45 °C
  • Non-blocking 104 Gbps switching capacity with jumbo frames up to 9578 bytes

Specifications

BrandMeraki
SeriesMS120
ModelMS120-48FP-HW
FormatRackmount
Network Management TypeManaged
Primary Ports48 x 10/100/1000BASE-T Ethernet RJ45 with auto negotiation and crossover detection (auto-MDIX crossover)
4 x 1G SFP uplink
RJ45 Management port
VLAN SupportYes
Jumbo Frames9578 bytes
ProtocolsHCRP, SPP
SecurityIntegrated multi-factor authentication for Dashboard management
Role-based access control (RBAC) with granular device and configuration control
Corporate wide password policy enforcement
IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing
Single-Host / Multi-Domain / Multi-Host / Multi Authentication
Port security: Sticky MAC, MAC whitelisting
DHCP snooping, detection and blocking
IPv4 and IPv6 ACLs
SNMPYes
QoSYes
LACPYes
Port MirroringYes
PowerIdle / Full Load Power: 37 / 908W
Available PoE / PoE+ Power: 740W
Power Supply Configuration: Fixed internal
Power input: 100 - 240V AC, 47-63 Hz
Power consumption: 8 - 908W
Features4 x 1G SFP uplink interfaces
Non-blocking switch with up to 104 Gbps bandwidth support
Fanless design
Up to 740 watt PoE budget with PoE+ support and dynamic power allocation for powering APs, phones,
cameras, and other PoE-enabled devices
6 configurable QoS queues for converged voice, video, and data applications
Low power consumption, quiet acoustic design, andshallow rack depth options, enabling flexible deployment in wiring closets as well as offices and classrooms
Dimensions1.73" x 17.32" x 13.39"
Weight12.70 lbs.
TemperatureOperating Temperature: 0 ~ 45 degree Celsius
Humidity5% - 95%, Non-condensing

Questions about this item

How can I confirm the Meraki MS120-48FP-HW is operating correctly after rack installation?

Log into the Meraki Dashboard and verify the switch appears online with all 48 RJ45 ports and 4 SFP uplinks showing green link status, then check that PoE devices such as access points or cameras are receiving power within the 740W budget.

What comes in the box with the MS120-48FP-HW and what must I purchase separately?

The unit ships with the 1U rack-mountable switch, a fixed internal power supply for 100-240V AC input, and mounting hardware; SFP transceivers for the four 1G uplink ports and Ethernet patch cables for the 48 RJ45 ports are not included.

Which MS120 model should I choose if I need 48 ports with a 740W PoE+ budget?

The MS120-48FP-HW provides exactly 48 10/100/1000BASE-T ports plus 4 1G SFP uplinks and a 740W PoE+ budget; other MS120 models offer fewer ports or lower PoE capacity, so select this SKU when the full 48-port count and high PoE budget are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.