We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cisco GLC-SX-MM-RGD= rugged SFP transceiver with LC duplex connector

Cisco Systems, Inc.

Cisco Systems, Inc. GLC-SX-MM-RGD= 1000BASE-SX SFP Transceiver

SKU CH-G21D-ZY0ZQ

A hot-swappable SFP transceiver linking a Gigabit Ethernet port to 62.5 µm multi-mode fibre at 850 nm for up to 1800 ft at 1 Gbps

  • Device TypeTransceiver
  • Network Media62.5 µm Multi-mode Fiber
  • Wavelength850nm
  • ProtocolsTCP/IP
  • Ports1 x LC/PC Duplex Connector 1000Base-SX
  • Max Distance1800 ft
  • Hot-swappable SFP enables quick network changes
  • 1 Gbps transfer rate over multi-mode fibre
  • 850 nm wavelength suits 62.5 µm core fibre
  • Reaches 1800 ft on multi-mode links
  • Lightweight 0.25 unit simplifies installation

Rugged SFP for Multi-Mode Fibre

The Cisco GLC-SX-MM-RGD= is a hot-swappable 1000BASE-SX transceiver built for Gigabit Ethernet links over 62.5 µm multi-mode fibre. It serves network engineers and integrators who need a reliable, standards-based module for campus or industrial LAN uplinks.

LC Duplex Connector and 850 nm Operation

A single LC/PC duplex connector carries both transmit and receive paths at an 850 nm wavelength. The ruggedised housing withstands harsher environments than standard SFPs while the hot-swap design allows insertion or removal without powering down the switch, reducing maintenance windows.

Replaces Standard SX Modules in Demanding Sites

This unit upgrades a conventional 1000BASE-SX SFP when extended temperature range or vibration resistance is required. The jump is worth it for deployments in unconditioned cabinets, outdoor enclosures or factory floors where a commercial-grade transceiver would risk premature failure.

Highlights

  • Hot-swappable SFP enables quick network changes
  • 1 Gbps transfer rate over multi-mode fibre
  • 850 nm wavelength suits 62.5 µm core fibre
  • Reaches 1800 ft on multi-mode links
  • Lightweight 0.25 unit simplifies installation

Specifications

BrandCISCO
ModelGLC-SX-MM-RGD=
Device TypeTransceiver
Network Media62.5 µm Multi-mode Fiber
Wavelength850nm
ProtocolsTCP/IP
Ports1 x LC/PC Duplex Connector 1000Base-SX
Max Distance1800 ft
Transfer Rate1 Gbps
FeatureSold as 1 Each.
Weight0.25
Shipping weight0.02 kg
Package size220 × 161 × 14 mm

Questions about this item

What distance does the 850nm wavelength support over 62.5 µm multi-mode fiber?

The 850nm wavelength supports up to 1800 ft over 62.5 µm multi-mode fiber at 1 Gbps.

What connector type does the GLC-SX-MM-RGD= use for physical mounting?

It uses a single LC/PC duplex connector that plugs directly into a compatible SFP port.

How is this hot-swappable transceiver installed without disrupting the network?

Insert the module into an active Gigabit Ethernet SFP slot until it clicks; the port remains online during insertion.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.