We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cisco GLC-FE-100FX-RGD= 100 Mbps 1310nm SFP transceiver module

Cisco Systems, Inc.

Cisco Systems, Inc. GLC-FE-100FX-RGD= 100 Mbps 1310nm SFP transceiver

SKU CH-YFNX-7X66J MPN GLC-FE-100FX-RGD=

A hot-swappable SFP transceiver providing 100 Mbps 100BASE-FX connectivity over multi-mode fibre at 1310nm for Cisco industrial and SmartGrid switches

  • Network MediaMMF
  • Wavelength1310nm
  • ProtocolsTCP/IP
  • Transfer Rate100 Mbps
  • FeatureGLC-FE-100FX-RGD modules operate in Fast Ethernet or dual-ra
  • Hot-swappable SFP enables quick network changes
  • 100 Mbps Fast Ethernet speed for reliable links
  • 1310 nm wavelength suits multi-mode fibre runs
  • Rugged design fits Cisco Industrial Ethernet switches
  • Plugs directly into Fast Ethernet or dual-rate ports

Industrial Fast Ethernet SFP

The Cisco GLC-FE-100FX-RGD= is a 100 Mbps 1310nm SFP transceiver built for industrial Ethernet and SmartGrid switches. It plugs into Fast Ethernet or dual-rate Fast/Gigabit ports to provide a 100BASE-FX multi-mode fibre link. The module is hot-swappable so it can be installed without powering down the switch. It is intended for network operators extending ruggedised copper infrastructure over fibre.

Fits standard SFP cages in Cisco industrial routers

The transceiver slides into any compatible SFP slot on supported Cisco Industrial Ethernet and SmartGrid platforms. No additional cabling or adapters are required beyond a standard multi-mode fibre patch cord with LC connectors. Because it draws power directly from the host port, it does not need a separate power supply or external enclosure. The hot-swap design frees maintenance windows by allowing live replacement.

Ruggedised optics with LC interface

The rugged construction is rated for the temperature and vibration ranges found in industrial environments. An LC duplex receptacle accepts standard multi-mode fibre patch cables for immediate deployment. No software licence or configuration utility ships with the module; the host switch recognises the transceiver automatically. The package contains only the SFP unit itself.

Highlights

  • Hot-swappable SFP enables quick network changes
  • 100 Mbps Fast Ethernet speed for reliable links
  • 1310 nm wavelength suits multi-mode fibre runs
  • Rugged design fits Cisco Industrial Ethernet switches
  • Plugs directly into Fast Ethernet or dual-rate ports

Specifications

BrandCISCO
ModelGLC-FE-100FX-RGD=
Network MediaMMF
Wavelength1310nm
ProtocolsTCP/IP
Transfer Rate100 Mbps
FeatureGLC-FE-100FX-RGD modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco Industrial Ethernet and SmartGrid switches and routers
Shipping weight0.03 kg
Package size126 × 124 × 14 mm

Questions about this item

How far can this 100 Mbps SFP reach over multi-mode fibre at 1310 nm?

The module is rated for 100 Mbps over multi-mode fibre at 1310 nm; exact reach depends on the fibre grade and link budget of the specific installation.

What is the typical power draw and heat output when this transceiver runs continuously in an industrial switch?

Cisco rugged SFP modules are designed for low power consumption and extended temperature operation; the switch chassis handles cooling and power budgeting.

Which Cisco switches or routers accept this rugged SFP for a Fast Ethernet link?

The module fits Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports on Cisco Industrial Ethernet and SmartGrid switches and routers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.